15-Minute Jump By Kim Duff, photos by author I used to sell these jumps for $25 (before the jump cup strips came along). They are quick and easy to make, and they break down for easy storage and traveling. You can also combine these jumps to make double and triple jumps. Materials * 3 - 10 ft. lengths of 1" schedule 40 PVC * 1 - Pair of Clip and Go Jump Cup Strips * 2 -1" schedule 40 PVC 4-way tees * 6 -1" schedule 40 PVC end caps * Electrical tape or paint to color the jump bar (or not!) * PVC cement Tools * Hack saw, plastic saw, or PVC pipe cutter * Pencil or marker * Measuring stick or tape Directions 1. Cut the following pieces from the PVC pipe: 2. Connect the four-way tees together using one of the 4 ft. pieces of pipe as shown in Figure 1. 1 3. Add 2 of the 1 ft.-long feet to each of the four-way tees. * 2 - 4 ft. pieces for the ground bar and the jump bar. 4. Insert a 3 ft. upright in the remaining hole of each 4-way tee. * 2 - 3 ft. pieces for the up rights. 5. Place the caps on the top of the uprights and the ends of the feet. * 4 - 1 ft. pieces to make the feet to stabilize the jump. November 16 | Clean Run 33