Hydrocarbon Processing - December 2021 - 14

STEAM TRAPS
LONG LIFE, ENERGY EFFICIENCY, & MAXIMUM PROCESS PRODUCTION
Free Float®
and Float-Dynamic®
Steam Traps
Free Float and Float-Dynamic steam traps are designed for drip,
tracer, clean steam, and process service to 1,740 psig. Capacities
of Float-Dynamic models are as high as 350,000 lb/hr with drain
trap leakage rating equivalent to Class 6. Free Float stainless steel
ball float serves as main valve and responds instantly to condensate
flow. Entire surface of ball serves as main valve. No hinges
or linkages are used. Separate thermostatic element removes any
air present in the system. TLV's Float-Dynamic steam traps utilize
a Free Float ball valve to actuate a piston operated main valve
to provide a high condensate drainage capacity. Traps provide
reduced maintenance, lower operating
costs, and long service life.
SST Series
Stainless steel traps, all stainless steel
internals. For drip, tracer, and clean
steam applications to 650 psig. Connection
NPT, S.W. or flanged. 1
horizontal & vertical configurations.
⁄2
- 1 "
SJ, J, JL Series
Cast steel and cast iron float traps,
stainless steel internals for all applications
to 300 psig, capacities to 131,850
lb/hr. NPT, flanged connections 1
⁄2
- 4 "
straight through horizontal or same side
parallel sizes.
SH, JH(R)(L) Series
Carbon steel or chrome moly traps, all
stainless steel internals. Steam tight
even under low condensate flow conditions
for high pressure superheat
applications to 1,740 psig, capacities
to 350,000 lb/hr. NPT, S.W., or flanged
connections. 1
⁄2
- 4 " in horizontal or vertical
configurations.
PowerDyne™ Steam Traps
TLV's PowerDyne steam traps offer the widest pressure range
of any thermodynamic steam trap available and combine both a
thermodynamic disc and a thermostatic air vent to provide fast,
efficient removal of condensate and air. PowerDyne steam traps
are available with in-line replacement modules for ease of maintenance.
®
P
Series
Stainless steel and carbon steel traps,
all stainless steel internals. For drip,
tracer, and light processes to 1,400
psig, capacities to 4,550 lb/hr. NPT,
S.W., or flanged connection in 1
⁄4
horizontal configurations.
QuickTrap®
Series
Two-bolt replacement system
enables installation in minutes.
Universal flange design permits
correct installation in any configuration.
Choose from Free Float,
Thermodynamic or Thermostatic
up to 650 psig. 1
⁄2
- 1 " available in
NPT, S.W. or flanged.
HR Series
Carbon steel and chrome moly traps
with in-line replacement modules for
high pressure drip applications to 3,700
psig, capacities to 1,050 lb/hr. NPT,
S.W. or flanged Connections 1
horizontal configurations.
⁄2
- 1 "
Thermostatic Steam Traps
TLV's thermostatic steam traps deliver the benefits of efficient
operation and long service life. Design of stainless steel internal
components, bimetallic elements or patented balanced pressure
capsule, along with high temperature rating (572°F) make traps
suitable for use on all applications.
L Series
PowerTrap®
Non-Electric Pumps: GP & GT Series
TLV's unique, patented, non-electric pumps permit the return of
condensate or other fluids by using the motive force of steam or
compressed air. TLV pumps eliminate the problems associated
with electric pumps (leaking seals, faulty motor controls, cavitation,
failed motors, and hazardous locations).
The patented float operated
mechanism uses an Inconel spring
which compresses rather than stretches
to activate the pump. Other internals
are stainless steel with critical wearing
parts first heat treated, then an additional
super hard coating is applied to
deliver the most reliable non-electric
pump available. Cast iron, carbon steel,
or stainless steel non-electric pumps
with capacities exceeding 80,000 lb/hr.
Available in pump or pump/trap combinations for wide range of
applications. NPT or S.W. connections from 1 - 3 " .
13901 South Lakes Drive
Charlotte, NC 28273-6790
Tel: 704-597-9070
www.tlv.com
Maintainable carbon or stainless steel
traps with patented " fail-open " design
for drip, tracer, and clean steam, to 650
psig, capacities to 1,700 lb/hr. NPT,
S.W., or flanged in 1
⁄4
- 1 " horizontal or
vertical configurations.
TrapMan®
Computerized Steam Trap Management
System. Complete measurement
and analysis consisting of Trapman
hardware, a precise ultrasonic and temperature
testing instrument, and TrapManager®
software,
a comprehensive
Windows 7 program designed to enable
extensive data analysis and database
management of the entire trap population.
FOR
TECHNICAL ASSISTANCE CALL:
Fax: 704-583-1610
1-800-TLV-TRAP
- 1 "
http://www.tlv.com
Hydrocarbon Processing - December 2021

Table of Contents for the Digital Edition of Hydrocarbon Processing - December 2021
