Underground Construction - August 2017 - 48

REHABTECHNOLOGY PRODUCTS
ROBOTIC CUTTERS
CUES

RS Technical Services

The CUES small and large Kangaroo
cutters are specifically designed to
reinstate wastewater service laterals, remove protruding taps, and
brush finish existing cuts. The cutters function in a range of 6- through
30-inch pipe, are equally effective in CIPP or fold and form liners, and can
be installed on any CCTV manufacturer's truck-mounted system. CUES
also developed a new .9hp air motor for the small Kangaroo cutter line
to provide more power, increased productivity, and a smoother cut when
operating in 8"-12" relined pipe. (800) 327-7791, cuesinc.com

The RST Tap Cutter is
capable of 500-foot pipe
runs due to its six-wheel
drive, 90-watt powertrain, stabilizing bar and unique cable design. It features a mechanical
ram, which allows the cutting arm to extend horizontally up to 6 inches,
so the unit does not need to be repositioned during cuts. A low-drag hose
provides approximately 125 psi of air pressure to rotate the cutting bit at
12,000 rpm. (800) 767-1974, rstechserv.com

LMK Technologies

Vortex/Schwalm

German-engineered
Schwalm Robotic systems cut faster and are
the most efficient cutters in the market. The self-driven robot can access
the pipe and make renovations from a single manhole access point. It
cuts, grinds and chisels the circumference of a pipe, and operates in 5.5to 24-inch diameters. Abilities include remote disconnection of the lining
equipment, which allows continued use of the robot while the first liner is
curing, and increases production. (815) 640-9302, lmktechnologies.com

Schwalm USA sells
the world's most
advanced robotic systems for trenchless sewer maintenance and repairs. Depending on needs,
TALPA FSR 1330 and TALPA FSR 2060 models' wide range of motion
and maneuverability will mill, cut, clean and rehab laterals in the toughest
conditions and through all kinds of pipe. Schwalm's stable platform and
design integrates with most any TV truck in the market. (855) 949-3441,
schwalm-usa.com

ROCK ROLL
&
Through the most treacherous rock and waves that roll, Mears'
Horizontal Directional Drilling and Direct Pipe® group lead the
industry in technological and engineering solutions developed to
meet geographical, environmental and climatic challenges head on.
- Conventional HDD Crossings
- Marine crossings (Water-to-Water and Shore Approaches)
- Hard Rock Drilling
- Design/build
- Engineering, Procurement and Construction
- Direct Pipe®
Mears specializes in marine projects and hard rock environments. Engineering
solutions developed to meet geographical, environmental and climate
challenges head on.

Certified in Safety, Quality, and Environmental: OHSAS 18001:2007,
ISO 9001:2008 and ISO 14001:2004.
Direct Pipe® is a US registered trademark owned by Herrenknecht AG of the Federal Republic
of Germany, which is not affiliated with Mears Group, Inc.

ucononline.com

UC August working.indd 48

www.mearsHDD.net

Underground Construction August 2017

8/1/2017 10:43:06 AM

http://www.rstechserv.com http://www.cuesinc.com http://www.lmktechnologies.com http://www.schwalm-usa.com http://www.mearsHDD.net http://www.ucononline.com

Underground Construction - August 2017

Table of Contents for the Digital Edition of Underground Construction - August 2017