Dental Equipment Catalog - 2021/2022 - 88

CAD/CAM TECHNOLOGY
CAD/CAM Technology
Milling Blocks
MILLING BLOCKS
NEW!
IPS e.max®
IPS e.max®
Ivoclar Vivadent
ZirCAD Blocks
Ivoclar Vivadent
ZirCAD Blocks
Zirconium-oxide ceramic, preshaded, monochromatic
blocks. High flexural strength of 850-1,200 MPa.
Lifelike aesthetics and fracture toughness. Suitable
for single-visit treatments in the dental practice. For
full-contour crowns and bridges. No risk of chipping.
Furnace required postmilling.
Zirconium-oxide ceramic, preshaded, monochromatic
blocks. High flexural strength of 850-1,200 MPa.
Lifelike aesthetics and fracture toughness. Suitable
for single-visit treatments in the dental practice. For
full-contour crowns and bridges. No risk of chipping.
Furnace required postmilling.
*Available for CEREC®
Telio®
CAD Temporary Blocks
Ivoclar Vivadent
Acrylate polymer (PMMA) blocks for
chairside milling of temporary restorations.
Long-term temporaries with a wear period
up to 12 months. Flexural strength of 130
MPa. High material homogeneity, durable
shade stability, and lifelike fluorescence.
Indications include temporary anterior/
posterior crown and bridges (with up to 2
pontics), temporary restorations on implants,
and therapeutic restorations to correct TMJ
problems and occlusal adjustments. Size
A16 blocks (S/L) are indicated for temporary,
single-tooth, hybrid-abutment crowns and
feature a prefabricated interface for direct
cementing onto the Sirona®
furnace required.
Telio®
Ivoclar Vivadent
*Available for CEREC®
, PlanMill, and PrograMill™
.
C17
B45
, Planmeca PlanMill®
, and PrograMill™
.
C17
B45
Acrylate polymer (PMMA) blocks for
chairside milling of temporary restorations.
Long-term temporaries with a wear period
up to 12 months. Flexural strength of 130
MPa. High material homogeneity, durable
shade stability, and lifelike fluorescence.
Indications include temporary anterior/
posterior crown and bridges (with up to 2
pontics), temporary restorations on implants,
and therapeutic restorations to correct TMJ
problems and occlusal adjustments. Size
A16 blocks (S/L) are indicated for temporary,
single-tooth, hybrid-abutment crowns and
feature a prefabricated interface for direct
cementing onto the Sirona®
furnace required.
TiBase. No
CEREC ®
Tessera™
Dentsply Sirona
Advanced lithium disilicate CAD/CAM block.
Two-part crystal composition, lithium disilicate,
and virgilite, embedded in a glassy zirconia
matrix. High flexural strength of 700 MPa.
Simple and fast processing. Indicated for
posterior and interior crowns, inlays, onlays,
and veneers. Fast firing time of 4½ minutes
in the CEREC SpeedFire furnace. Furnace
required postmilling.
90
90
90
18BC8576p82-97 CAD CAM Technology.indd 90
*Available for CEREC®
, PlanMill, and PrograMill™
.
B40L
B55
A16
CAD Temporary Blocks
TiBase. No
*Available for CEREC®
, Planmeca PlanMill®
, and PrograMill™
B40L
.
B55
A16
www.henryscheinequipmentcatalog.com
www.henryscheindental.com/digital
7/23/18 11:59 AM
C14
*Available for CEREC®
88
www.henryscheindental.com/digital
http://www.henryscheindental.com/digital
Dental Equipment Catalog - 2021/2022

Table of Contents for the Digital Edition of Dental Equipment Catalog - 2021/2022
