2016 Laboratory Equipment - 40

Polishing/Presses/Pressure Pots

60FC-TS
Polishing &
Grinding System
Two drum filters keep the air clean and remove dust
from the environment. 1⁄4-hp suction motor will process
500 cfm (cubic feet of air per minute). Two mounted
aluminum polishing hoods contain dust, polishing
compounds, and debris. Includes a two-speed #26 Red
Wing high-base lathe. Can be used with most dustcollection applications in the lab, including plaster, stone,
tripoli rouge, and aluminum oxide. 1-year warranty.

Complete Unit
(612-5685-AEB).........................................Ea. 1,765.99

Hydraulic
Denture Flask Press

1,112.99

Pneumatic Pressure Pot
An 8-qt. pressure pot used to cure a wide variety of
acrylics that require heat and pressure. Features a
heat-control thermostat and an internal temperature
gauge, which allow for an accurate reading and
setting of the pot's internal temperature. Internal
diameter is 91⁄2" and depth is 61⁄4". Adjustable
temperature range up to 212°F. Pressure-lock valve
allows unit to be disconnected from air line and
maintains air pressure.
Complete Unit
(161-0667-AEB)......................................... Ea.

An 8-qt. pneumatic curing vessel/pressure pot that
allows for proper denture repair and relines. Will also
double as a substitute curing pot, accommodating a
2-case bronze compress with cover removed. Built
to provide 22 psi of pressure while acrylic resin is
curing, forming a dense, crosslinked repair for dentist
and patient.
Complete Unit
(612-1148-AEB).................................Ea.

219.99

Contains: 1 of each: pressure gauge, safety valve & coil air hose.

Pressure Pot
A 6-liter pressure pot with a built-in pressure
gauge, convenient air quick-release valve, and an
electric heating element preset to 120°. Adjustable
temperature from 120°F to 160°F.
(288-0025-AEB).......................................Ea.
634.99

Pressure Pot

Rugged, easy-to-use press eliminates muscle
stress on backs and arms. Leak-proof hydraulic oil
chamber. Tempered steel construction with epoxy
paint finish for years of trouble-free service. Opening
for flasks measures 10"H x 51⁄2"W. Apply up to 3500
psi of controlled pressure on 2 flasks for trial pack and
final closure.
Single Flask Capacity
(333-4842-AEB).........................................Ea.

Pneumatic Curing Vessel/
Pressure Pot

419.99

An 8-qt. pneumatic high-pressure pot for curing a
wide variety of acrylics under controlled heat and
pressure. Recommended for pour, self-curing,
and ortho resins, as well as newer flexible and
heat-cured acrylics. Constructed of stainless steel
and aluminum. Easy-to-read, built-in dual gauges.
Variable temperature control and variable pressure
control. Factory preset for use at 20 psi. Quickconnect air-line connector. 120 volts.1-year warranty.
(242-0875-AEB)................................. Ea.
459.99

Pneumatic
Flask Press #832
* Safe and easy to use
* Push-button operation
* 215⁄8"H x 10"W x 81⁄4"D
* Weighs approximately 65 Lb.
* 75 Lb. of applied pressure per psi of actual pressure
Single-Flask Capacity
(333-7841-AEB).......................................Ea. 3,479.99

Benchtop Polishing Hood
with Suction and Light
Use with your existing lathe. Protects your health
and keeps your lab clean. Features built-in, quiet,
powerful suction; lighting; filter bags; safety switch
with manual reset. Makes your polishing lathe OSHA
compliant. Nonrusting polycarbonate body with steel
chassis. Heavy-duty rubber splash pans.
115-volt unit.
Dimensions; 193⁄4"H x 311⁄2"W x 193⁄4"D.
(333-2053-AEB).................................Ea.
2,689.99

EquipmEnt BuyErs GuidE

Wiropress SL
Pressure Vessel
Provides a constant atmosphere of 60 psi for virtually
bubble-free curing of all crown & bridge investments,
silicone duplicating, die stones, and acrylic materials.
Pressurization ensures dense, smooth surface on all
molds, gypsum models, and acrylic repair work.
(412-6523-AEB) .................................... Ea. 1,052.99

Table of Contents for the Digital Edition of 2016 Laboratory Equipment