Figure fll = iJlChlU) ~' tJeam allowana' II. SET -I:\' SLEEVE - Pattern and Instruction (Figures III and IV) Close darts at upper and lower edges of sleeve. Using a 'Is" allowance close sleeve seam and gather lower edge. Fold sleeve band lengthwise with right sides together and seam from notches outward, leaving the space between the notches free. Turn. Sew free edge to gathered edge of sleeve matching point A and the sleeve seam. Slip stitch open edge of band to bottom of sleeve on inside. Tie loose end of band into a bow. Figure IV Figure V III. DROPPED SHOULDER SLEEVE - Pattern and Instructions (Figures V and VI) Dan or gather sleeve at elbow. Bind or roll hem loose edge at top of sleeve. Lap back over front at top matching shoulder points and baste. Using 'Is" allowance seam sleeve to within 2V," of lower edge of sleeve. Placket or bind lower 2V," of lee\'e seam. i\lake a snap, hook and eye, or button closure. GTE: This slee\'e attaches to an armhole with a 2" drop at the shoulder point. fJlf"/'eJ 5%" /8 ,u>aJII allomunre Figure VI SITT Fall 1983/Theatre Design & Technology 23