IEEE Systems, Man and Cybernetics Magazine - January 2023 - 68

Tokyo 100-0011, Japan. His research interests include
nonlinear control system design.
Ryo Chikaraishi (s211506t@st.go.tuat.ac.jp) is a graduate
student of engineering at the Tokyo University of Agriculture
and Technology, Tokyo 184-8588, Japan. He graduated
from the Faculty of Engineering, Tokyo University of
Agriculture and Technology in 2021. His research interests
include nonlinear control system design.
Mingcong Deng (deng@cc.tuat.ac.jp) earned his Ph.D.
degree in systems science from Kumamoto University,
Japan, in 1997. From April 1997 to September 2010, he was
with Kumamoto University; the University of Exeter, United
Kingdom; and the NTT Communication Science Laboratories;
Okayama University, Japan. Since October 2010, he
has been a professor with the Tokyo University of Agriculture
and Technology, Tokyo 184-8588, Japan. He has more
than 550 publications, including 189 journal articles, in
peer-reviewed journals including IEEE Transactions and
other top tier outlets. He is a cochair of the Agricultural
Robotics and Automation Technical Committee of the
IEEE Robotics and Automation Society (RAS) as well as a
chair of the Environmental Sensing, Networking, and Decision-Making
Technical Committee of the IEEE Systems,
Man, and Cybernetics Society (SMCS). He was the recipient
of the 2014 and 2019 Meritorious Services Awards of
the SMCS and the 2020 IEEE RAS Most Active Technical
Committee Award (IEEE RAS). He is a member of the
Engineering Academy of Japan.
Yuichi Noge (noge@ees.kyushu-u.ac.jp) earned his
Ph.D. degree in engineering from the Nagaoka University of
Technology, Japan, in 2014. From 2014 to 2017, he was at the
Tokyo Metropolitan College of Industrial Technology as an
assistant professor. From 2017 to 2020, he was at the Tokyo
University of Agriculture and Technology as an assistant
professor. He has been an assistant professor with the
Kyushu University, Fukuoka 819-0395, Japan, since 2020.
His research interests include power conversion circuits
and power semiconductor applications.
References
[1] K. Aoyama, N. Motoi, Y. Tsuruta, and A. Kawamura, " High efficiency energy conversion
system for decreaces in electric vehicle battery terminal voltage, " IEEJ J. Ind.
Appl., vol. 5, no. 1, pp. 12-19, Jan. 2016, doi: 10.1541/ieejjia.5.12.
[2] S. Mukherjee, R. G. Hoft, and J. A. McCormick, " Digital measurements of the
efficiency of inverter-induction machines, " IEEE Trans. Ind. Appl., vol. 26, no. 5, pp.
872-879, Sep./Oct. 1990, doi: 10.1109/28.60059.
[3] P. D. Malliband, D. R. H. Carter, B. M. Gordon, and R. A. McMahon, " Design of a
double-jacketed, closed type calorimeter for direct measurement of motor losses, " in
Proc. 7th Int. Conf. Power Electron. Variable Speed Drives (Inst. Elect. Eng. Conf.
Publ. No. 456), 1998, pp. 212-217, doi: 10.1049/cp:19980526.
[4] E. Ritchie, J. K. Pedersen, F. Blaabjerg, and P. Hansen, " Calorimetric measuring
systems, " IEEE Ind. Appl. Mag., vol. 10, no. 3, pp. 70-78, May/Jun. 2004, doi: 10.1109/
MIA.2004.1286624.
[5] D. Christen, U. Badstuebner, J. Biela, and J. W. Kolar, " Calorimetric power loss
measurement for highly efficient converters, " in Proc. Int. Power Electron. Conf.
(ECCE ASIA), 2010, pp. 1438-1445, doi: 10.1109/IPEC.2010.5544503.
68 IEEE SYSTEMS, MAN, & CYBERNETICS MAGAZINE January 2023
[6] B. Szabados and A. Mihalcea, " Design and implementation of a calorimetric measurement
facility for determining losses in electrical machines, " IEEE Trans. Instrum.
Meas., vol. 51, no. 5, pp. 902-907, Oct. 2002, doi: 10.1109/TIM.2002.806010.
[7] K. Orikawa, A. Nigorikawa, and J. Itoh, " Evaluation on chamber volume and
performance for simple calorimetric power loss measurement by two chambers, " in
Proc. 1st Int. Future Energy Electron. Conf. (IFEEC), 2013, pp. 914-919, doi: 10.1109/
IFEEC.2013.6687632.
[8] K. Mitsugi, Y. Noge, and M. Deng, " Simple calorimetric power loss measurement
system using single chamber and Peltier device with ambient temperature tracking
control, " in Proc. IEEE Appl. Power Electron. Conf. Expo. (APEC), 2020, pp. 393-398,
doi: 10.1109/APEC39645.2020.9124537.
[9] K. Mitsugi, and M. Deng, " Operator-based robust nonlinear control for calorimetric
power loss measurement system using Peltier device, " in Proc. 2nd Int. Conf. Ind.
Artif. Intell. (IAI), 2020, pp. 1-6, doi: 10.1109/iai50351.2020.9262207.
[10] X. Qiu and J. Yuan, " Temperature control for PCR thermocyclers based on Peltiereffect
thermoelectric, " in Proc. IEEE Eng. Med. Biol. 27th Annu. Conf., 2005, pp.
7509-7512, doi: 10.1109/IEMBS.2005.1616249.
[11] M. Deng, S. Wen, and A. Inoue, " Operator-based robust nonlinear control for a
Peltier actuated process, " Meas. Control, vol. 44, no. 4, pp. 116-120, May 2011, doi:
10.1177/002029401104400404.
[12] M. Deng, A. Inoue, and K. Ishikawa, " Operator-based nonlinear feedback control
design using robust right coprime factorization, " IEEE Trans. Autom. Control, vol. 51,
no. 4, pp. 645-648, Apr. 2006, doi: 10.1109/TAC.2006.872758.
[13] G. Chen and R. J. P. de Figueiredo, " On construction of coprime factorizations for
nonlinear feedback control systems, " Circuits Syst. Signal Process., vol. 11, no. 2, pp.
285-307, Jun. 1992, doi: 10.1007/BF01293677.
[14] H. Jacob, " Non-linear systems, stabilization, and coprimeness, " Int. J. Control,
vol. 42, no. 1, pp. 1-20, 1985, doi: 10.1080/00207178508933342.
[15] S. Bi, M. Deng, and S. Wen, " Operator-based output tracking control for non-linear
uncertain systems with unknown time-varying delays, " IET Control Theory Appl., vol.
5, no. 5, pp. 693-699, Apr. 2011, doi: 10.1049/iet-cta.2010.0232.
[16] C. Jiang, M. Deng and Y. Hayakawa, " Operator-based parallel compensation
control for hysteresis using ELM-based stop-type PI model, " in Proc. IEEE Int. Conf.
Mechatronics Automat., 2012, pp. 2054-2058, doi: 10.1109/ICMA.2012.6285138.
[17] M. Deng and T. Kawashima, " Adaptive nonlinear sensorless control for an uncertain
miniature pneumatic curling rubber actuator using passivity and robust right
coprime factorization, " IEEE Trans. Control Syst. Technol., vol. 24, no. 1, pp. 318-324,
Jan. 2016, doi: 10.1109/TCST.2015.2424853.
[18] A. Wang and M. Deng, " Robust nonlinear multivariable tracking control design to
a manipulator with unknown uncertainties using operator-based robust right coprime
factorization, " Trans. Inst. Meas. Control, vol. 35, no. 6, pp. 788-797, Mar. 2013, doi:
10.1177/0142331212470838.
[19] R. Chikaraishi and M. Deng, " Operator-based nonlinear control of calorimetric
system actuated by Peltier device, " Machines, vol. 9, no. 8, p. 174, Aug. 2021, doi:
10.3390/machines9080174.
[20] N. Bu and M. Deng, " System design for nonlinear plants using operator-based
robust right coprime factorization and isomorphism, " IEEE Trans. Autom. Control,
vol. 56, no. 4, pp. 952-957, Apr. 2011, doi: 10.1109/TAC.2011.2108370.
[21] M. Deng and N. Bu, " Robust control for nonlinear systems using passivity-based
robust right coprime factorization, " IEEE Trans. Autom. Control, vol. 57, no. 10, pp.
2599-2604, Oct. 2012, doi: 10.1109/TAC.2012.2188426.
[22] Y. Osawa and S. Katsura, " Variable heat disturbance observer for control of Peltier
device, " IEEJ J. Ind. Appl., vol. 8, no. 2, pp. 185-191, Mar. 2019, doi: 10.1541/ieejjia.8.185.
[23] E. Bullinger and F. Allgöwer, " Adaptive m-tracking for nonlinear higher relative
degree systems, " Automatica, vol. 41, no. 7, pp. 1191-1200, Apr. 2005, doi: 10.1016/
j.automatica.2005.01.012.
IEEE Systems, Man and Cybernetics Magazine - January 2023

Table of Contents for the Digital Edition of IEEE Systems, Man and Cybernetics Magazine - January 2023
