Tension Controls DFP-2 Dancer/Follower Arm Position Sensor Dimensions in inches (millimeters) The DFP-2 position sensor is designed for use in Dancer Control applications with the VERSATEC, and in Dancer and Follower Arm applications with the Spyder, DFC-90, DFC-A and FAD. It offers the same exceptional sensing performance as the original DFP sensor, but in a lighter duty low cost housing. A servo type flexible coupling is provided with the DFP-2 to allow for misalignment in shaft-to-shaft applications. Fifteen feet of shielded cable is also included for ease of installation. Flexible Coupling (included) Features Compact size saves space High quality potentiometer element provides essentially infinite resolution 360˚ rotation prevents sensor damage Servo type flexible coupling accommodates installation misalignment with no backlash Shielded cable included for wiring convenience Specifications Potentiometer 1 kΩ, 360˚ rotation Shaft Overhung load capacity, 4.5 kg (10 lb) at center of shaft Flexible Coupling Accommodates 5˚ angular and 0.25 mm (0.010 inch) offset misalignment with no backlash Enclosure IP62 Part Number DFP-2 Tension Controls 47