Hooks Magnet System High temperature magnets leave minimal suspension marks and eliminate gloss changes and cooling problems . Two types of magnet systems are offered and can be utilized in a variety of racking options . ASSEMBLY The MHS-22 consists of aluminum housing which holds two metal plate leads and a ferrite magnet . A special silicone rubber boot is placed over the housing shielding the magnet from coating contamination . The metal leads protrude from the silicone boot for magnetic contact . Simply replace the metal leads when they become covered with coating and no longer provide magnetic contact . REPLACEABLE PARTS MH-2 MHS-22 MHA-2 MHP-22 MHM-21 The MH-31 is an innovative 3 piece design . The MH-31 magnetic leads are integrated in the steel housing . The magnet is placed in the cradle of the housing and the MH-31 MHA-3 MHP-21 silicone boot is placed over the housing and magnet . The MH-31 housing is designed to be welded as part of a rack component, or can be used as an insert option on our proprietary socket rack system located on page 20 . All ferrite magnets and components are designed to withstand temperatures up to 500°F . Part Number MHS-22 MHP-22 MH-2 MHM-21 MHA-2 MH-31 MH-3 MHM-21 MHA-3 11 Description Magnet Assembly Type 2 with straight contact plates Replacement straight contact plates for Type 2 Assembly Aluminum Housing for Type 2 Assembly Large magnet for Type 2 or Type 3 Assembly Large Silicone cap for Type 2 Assembly Box Qty. 25 25 25 25 25 Magnet Assembly Type 3 with straight contact plates Stamped Housing for Type 3 Assembly Large magnet for Type 2 or Type 3 Assembly Silicone cap for Type 3 Assembly 25 25 25 25 phone 773-378-1909 * fax 773-378-2083 MH-3