Racks Powderpeg Rack Tips 1. Size Your Rack 2. Pick your Crossbar(s) First pick your desired rack size . Stock frame widths range from 20" - 40" wide and 30" - 72" tall . For custom sizes contact one of our engineers . The Powderpeg Rack supports a variety of different crossbars . To learn more about the advantages of each crossbar take a look at its corresponding catalog page . The Powder Peg Rack requires no special tools to assemble . Simply slide the tubes together and insert a cotter pin (provided) . PPG Top Crossbars attach to the rack with a simple cantilever mechanism contained within the uprights, so you'll always have a reliable ground regardless of paint accumulation . PPG Top-A 3. Pick your Hanging Style The PPGTOP attaches to the rack with a piece of channel bracket, and is then secured by a standard ΒΌ-20 bolt . The PPGTOP is best for customers hanging smaller parts in balanced loads . The PPGTOP-A attaches via two hang points that insert into two holes at the top of the rack . The PPGTOP-A is best for customers who desire a more stable hang . 19 4. Measure your Vertical Dropdown All PPGTOP-A and custom PPGTOP rack hangers are made to order . When placing your order we'll ask for some information about your desired dropdown distance and hanging orientation . We have existing standards for the other dimensions (pictured), but if you need a custom version contact one of our engineers . phone 773-378-1909 * fax 773-378-2083