Racks Slip Rack The custom designed Slip Rack allows for good versatility and easy configuration for use in powder, liquid and e-coat applications . The male-to-female crossbar insertion method can be employed by either a frame as shown to the right or a stem design . Mighty Hook crossbars can be constructed to fit the Slip Rack design to create maximum density while allowing for flexibility in a high part variability environment . Made to Order Contact our engineers to discuss the specific requirements for your operation and we will assist you in designing and producing the proper racks and crossbars for your application. X-Bar page 33 Peg Tube page 37 TSR-Bar page 31 W-Bar page 35 Z-Bar-HV page 29 Arrow Bar page 36 Z-Bar-LT page 26 Socket System Rack Each Socket Rack is custom designed to achieve maximum density and provide flexibility for part variability . The tube socket holders use replaceable and interchangeable hanging tips and holders for parts that cannot be held by traditional methods . The sockets can be welded to one or both sides of the rack to provide maximum part density, and can be produced as a U-Frame (shown) or on a single stem . Multiple single stem racks can be employed to hang long parts horizontally . Grounding between the tip and the socket is never compromised as the tube socket is protected with a silicone replaceable cap that protects the internal contact between the tip and the socket . Made to Order Contact our engineers to discuss the specific requirements for your operation and we will assist you in designing and producing the proper racks and crossbars for your application. pricing and ordering information on line at www.mightyhook.com 20http://www.mightyhook.com