Crossbars W Bars™ Innovative and advanced designed crossbars accept replaceable spring steel clips . Clips lock into position and can be easily removed and replaced for maximum versatility . For use in Powder Coating, Liquid/Wet and E-Coating applications . The spring tempered clips have excellent retention capability for holding parts that cannot be hung by traditional hooking methods, especially parts with lips but no holes and aluminum extrusion profiles . Bars are stocked with 2" hanging centers in 30", 40" and 48" lengths . Custom lengths and spacing available by special order . Packaged 25 pieces per box . Tips: Add powder peg ends, slip ends, stud ends or diamond ends . We will also customize the bar to fit your existing hanging system . Contact us to discuss your requirements . W-BAR-No Ends Made from 15 gauge steel with on center clip positions of 2" . Accepts W-Clip shown below . Bars are stocked in 30", 40" and 48" lengths . Custom lengths available upon request . Part Number W-BAR-30-1 W-BAR-40-1 W-BAR-48-1 Description 30"L crossbar w/ no ends 40"L crossbar w/ no ends 48"L crossbar w/ no ends W-BAR Clips 0 .032" x 0 .5" W C-1075 Spring Steel Clips for W-BARS . Stocked in 5 .5" widths with straight or forked ends for smaller contact points . Custom widths and configurations available upon request . Part Number W-55032 W-55032-B Description 5.5" x 0.032" Spring Clip - Flat Ends, No Notch 5.5" x 0.032" Spring Clip - Forked Notched Ends Box Quantity 100 100 Custom W-BAR-PP Designed to be used with our Powder Peg Rack on page 17 . These crossbars use a 1/4" dia . wire peg end that slips into the rack for a quick change . W-BAR-PP is custom made to order. Contact our engineers to have them designed and produced for your application. Powder Peg Rack 35 phone 773-378-1909 * fax 773-378-2083