Crossbars Arrow Bars™ The Strong, Unique Hanging Solution New and unique, the Mighty Hook Arrow Bar™ is engineered to hang both lightweight and heavy products that cannot be held securely by conventional hook/hanging methods in powder coating, liquid coating, and e-coating applications . Durable and engineered with a low profile, the laser cut arrow design allows for hanging from a variety of contact areas . The angle design virtually eliminates tilting or swinging of the part during finishing and gravity essentially locks the product on . The Arrow Bar™ is designed with an alternating pattern that allows products to be held on both sides of the crossbar and can be customized to fit any existing racking system . Stocked in 3 lengths and designed with standard 2" alternate spacing for maximizing density, the Arrow Bar™ concept can also be custom manufactured for specific applications . Packaged 25 pieces per box . Our ARROW BARS can be used in many different ways . Contact our experienced staff to assist you in choosing the proper crossbar for your requirements . ARW-BAR-No Ends Made from 10 gauge steel with 2" alternating spacing . Bars are stocked in 24", 30" and 40" lengths . Custom lengths and custom spacing available by special order . Part Number ARW-24-12-1 ARW-30-15-1 ARW-40-20-1 Description 24"W 12 point Arrow Head Crossbar 30"W 15 point Arrow Head Crossbar 40"W 20 point Arrow Head Crossbar Custom ARW-BAR-PP Designed to be used with our Powder Peg Rack on page 17 . These crossbars use a 1/4" dia . wire peg end that slips into the rack for a quick change . ARW-BAR-PP is custom made to order. Contact our engineers to have them designed and produced for your application. Powder Peg Rack pricing and ordering information on line at www.mightyhook.com 36http://www.mightyhook.com