Opportunities for Embedded High-Voltage Direct Current Evaluating the Benefits for the Legacy ac Grid P POWER SYSTEM ENGINEERS AND PLANNERS OFTEN consider high-voltage dc (HVdc) systems for bulk power transmission over long distances. There are two technologies within HVdc: line-commutated converters (LCC-HVdc) and voltage-source converters (VSC-HVdc). Each type has its own suitable range of applications. LCC-HVdc is a mature technology that has been available since the 1970s and uses thyristor valves. LCC-HVdc is commonly applied for high-capacity power transmission between two strong power systems (high short circuit ratio) over long distances with limited dynamic requirements (e.g., features such as fast power reversal, dynamic reactive power support, or black start are not available or are available only with limited performance). Currently installed systems reach ratings of 12 GW at a transmission voltage of ±1,100 kV and may cover distances beyond 3,000 km. The introduction of VSC-HVdc in the late 1990s initiated the use of self-commutated valves employing insulated-gate bipolar transistors with a significant improvement in dynamic performance. Presently, the ratings of VSC-HVdc a re lower than those of LCC-HVdc. VSC-HVdc systems are now installed with a rating of 3,000 MW at a transmission voltage of ±525 kV, and higher ratings are under development. For special Digital Object Identifier 10.1109/MPE.2020.3001419 Date of current version: 19 July 2020 58 ieee power & energy magazine 1540-7977/20©2020IEEE september/october 2020