PASS & SEYMOUR WALL PLATES Custom Panel Plates Ordering Instructions Wall Box Dimensions Panel Plates are limited to fit the box configuration shown. Caution: Not all boxes are identical in overall dimensions, but are built to exact standards on device mounting holes. When boxes are connected together, they should be shimmed to ensure that the bottom hole to bottom hole dimension between two vertically adjacent boxes is 4-1/8" as errors are cumulative. Critical dimensions circled. If additional mounting holes are required in the corners, indicate location and spacing. 39/32'' TYP 41/8'' TYP. 41/8'' TYP. 41/8'' TYP. 27/32'' . TYP. 41/8'' TYP. 41/8'' TYP. 1/4'' TYP. 1/4'' TYP. 11/8'' TYP. 113/16'' TYP. 302/304 Stainless Steel Two Gangs High 8-3/4" Three Gangs High 12-7/8" CATALOG NUMBER PP21 PP22 PP23 PP24 PP25 PP26 PP27 PP28 PP29 PP210 PP31 PP32 PP33 PP34 PP35 PP36 PP37 PP38 PP39 PP310 GANGS WIDE One Two Three Four Five Six Seven Eight Nine Ten One Two Three Four Five Six Seven Eight Nine Ten PLATE WIDTH 2-3/4" 4-9/16" 6-3/8" 8-3/16" 10" 11-13/16" 13-5/8" 15-7/16" 17-1/4" 19-1/16" 2-3/4" 4-9/16" 6-3/8" 8-3/16" 10" 11-13/16" 13-5/8" 15-7/16" 17-1/4" 19-1/16" PLATE HEIGHT Four Gangs High 17" Five Gangs High 21-1/8" CATALOG NUMBER PP41 PP42 PP43 PP44 PP45 PP46 PP47 PP48 PP49 PP410 PP51 PP52 PP53 PP54 PP55 PP56 PP57 PP58 PP59 PP510 GANGS WIDE One Two Three Four Five Six Seven Eight Nine Ten One Two Three Four Five Six Seven Eight Nine Ten PLATE WIDTH 2-3/4" 4-9/16" 6-3/8" 8-3/16" 10" 11-13/16" 13-5/8" 15-7/16" 17-1/4" 19-1/16" 2-3/4" 4-9/16" 6-3/8" 8-3/16" 10" 11-13/16" 13-5/8" 15-7/16" 17-1/4" 19-1/16" WALL PLATES PLATE HEIGHT I-29 WWW.LEGRAND.US/PASSANDSEYMOURhttp://WWW.LEGRAND.US/PASSANDSEYMOUR