PASS & SEYMOUR ELECTRICAL ACCESSORIES Low-Voltage Switching Components Features * Mount in standard 1/2" KO through noise suppressing nylon ring. * Maximum ambient temp: 140°F (60°C). * Insulated flame retardant nylon shell. * Prestripped 5-1/2" (140mm) #22 AWG leads for easy wiring. 3RD PARTY COMPLIANCE RATING CATALOG NUMBER A. * Split coil design energizes ON coil to close line contacts, and OFF coil to open contacts. * Can be mounted in any position. * Operates on momentary impulse. * Draws .520 mA. V. UL Listed CSA Listed MAGNETIC LATCHING RELAY, 24V/24VDC CONTROL 1070B 20 120/277V 20 347V * * CSA listed for 347V. 3.156'' Line Voltage Leads 1.290'' Nylon Mounting Ring Control Leads .818'' 1.176'' 1070B #12-19 Stranded Copper Wire (Tinned) Type T-1/32 INS Black - 6'' Features Type SRIR #22 Stranded Tinned Wire Thermoplastic Insulation - 5-1/2'' Long * Heavy-duty toggles recommended where lowvoltage switches must match conventional switches. * Available in Despard® interchangeable and heavyduty toggle versions. * Side wired screw terminals. RATING COLOR A. V. DESCRIPTION .50'' ELECTRICAL ACCESSORIES MOMENTARY CONTACT SWITCHES .25'' 1091I Ivory 3 24 AC/DC Despard Interchangeable 1091W White 3 24 AC/DC Despard Interchangeable 1091GRY Gray 3 24 AC/DC Despard Interchangeable 1050K Key only for Despard Locking Switch 500K Key only for Heavy-Duty Locking Switch Note: When installing low-voltage control wiring, wires should not be bundled or run in parallel with line voltage wires. J-14 1.70'' .39'' 1.69'' 1091 .88'' All devices listed on this page conform to NEMA WD-1 and WD-6. WWW.LEGRAND.US/PASSANDSEYMOURhttp://WWW.LEGRAND.US/PASSANDSEYMOUR