Magnetics Business & Technology - July/August 2022 - 4

EDITOR'S CHOICE
Research Leads to New Alloy from VAC & Lamination Process
for Electric Drives
Volume 21, Issue 4
Editor & Publisher
David Webster
Contributing Editor
Dr. Stan Trout
Director of Operations and
Support Services
Ross Webster
Director of Sales and Content
Scott Webster
Since 2018, Vacuumschmelze GmbH & Co. (VAC) has been working with partners from industry,
research institutes and universities on a project to improve the power density of electric motors
for automotive and aircraft engines. Funded by the German Federal Ministry of Education and
Research, the joint collaboration project achieved significant results including development by
VAC of a new alloy with important attributes and a new process for making motor laminations.
Two components of the motors were considered, rare-earth permanent magnets and cobalt-iron
laminations. The objective was to reduce the size, weight and losses of electric drive systems
toward establishing more sustainable transportation systems.
VAC succeeded in achieving an energy density of 282 kJ/m3 in laboratory tests with the development
of a new permanent magnet alloy based on samarium cobalt (SmCo). With this value, a
new world record was achieved, reports the company. In addition, a first batch of the new alloy
Vacomax 278 HR was produced under series production conditions with promising results. The
alloy is in the production transition stage, and further steps have been taken to increase quality
and output.
The magnets were installed by VAC in rotors that were further processed into electric motors by
the project partner Maccon and are now being tested by the industrial partners Daimler AG and
Lange Aviation. With a cobalt content of 49%, the new material proved to be the first choice for
the demanding requirements in high-end automotive and aviation applications.
Also, a new joining technology for the laminations was developed. The individual lamellae with
sheet thicknesses of 0.1 mm are joined in an established laser tying process. The novelty, however,
is that the joint is created inside the stacks in a similar way to punch-packing and enables
better cohesion. At the same time, the tying points can be significantly reduced compared to
punching and significantly thinner sheets can be processed. This results in lamination stacks with
a fill factor of up to 98% and minimal eddy current losses. In addition, the process is scalable and
can be applied to large quantities. The combination of high-performance material and cost-optimized
manufacturing process for large quantities makes it possible to reduce volume and weight
and serve a larger market than before with high-performance, resource-saving products.
" The unique collaboration between research and industry has enabled us to develop a new alloy
and manufacturing process in a very short time, both of which significantly increase the sustainability
of transport systems, " says Dr. Matthias Katter, head of advanced research permanent magnets
at VAC and coordinator of the project. " We are very excited to see the results of our partners
with the demonstrators and, thanks to our unique vertical integration of manufacturing, we see
ourselves well equipped to realize even complex system solutions on a large scale according to
the individual specifications of our partners. "
For more info, see www.vacuumschmelze.com.
4 Magnetics Business & Technology * July/August 2022
Design & Layout
Scott Webster
Administration
Marsha Grillo
Magnetics Business & Technology (ISSN
#1535-1998) is a publication of Webcom
Communications Corp.
Subscriptions for one year are free for the
qualified US, $44.00 non-qualified US and
$60.00 outside US. Single copies are $20.00
each plus shipping. Back issues are available
for $20.00. Payment must be made
in US funds in order to process the order.
Direct all subscription inquiries, orders and
address changes to Fulfillment Services.
Reprints: For reprint requests contact Webcom
Communications at 720-528-3770.
Celebrating 21 Years of Magnetics Magazine!
© Copyright 2022 Webcom Communications
Corp. Material in this publication may not be
reproduced in any form without written permission.
Requests for permission should be
directed to the customer service manager.
Webcom Communications Corp.
501 South Cherry Street, 11th Floor,
Denver, CO 80246 Phone 720-528-3770
www.MagneticsMag.com
www.MagneticsMag.com

http://www.vacuumschmelze.com http://www.MagneticsMag.com http://www.MagneticsMag.com

Magnetics Business & Technology - July/August 2022

Table of Contents for the Digital Edition of Magnetics Business & Technology - July/August 2022