Magnetics Business & Technology - November/December 2022 - 21

PRODUCT NEWS
automated factory in Japan for the production of its wireless
charging coils and modules. Plans call for construction to be completed
in April 2023 and mass production at the facility to begin
in September 2023. The Inakura Factory West Site is located in
Nikaho City, Akita Prefecture along the Sea of Japan northwest of
Sendai. The two-story plant will have about 13,000 square meters
of floor space.
The F2780Y001L-02X Series contains 2-pi low-pass filter, and
features a Cat6a keystone jack for input and a Cat6a RJ45
Plug pigtail for output. The two-product series currently comprises
a single-channel F2780Y001L-021 and a dual-channel
F2780Y001L-022. Both are compatible with IEEE Type 1/Type
2/Type 3/Type 4 PoE application up to 100W PSE, and have an
operating current up to 1.5A and voltage rating up to 100VDC.
ITG Electronics is a leader in EMI Filter solutions for shielded MRI
room constructions. Its previous innovations include CAT6a grade
filters enabling high noise attenuation through a dual-stage filter;
and CAT5, low-voltage dataline and UL listed power line EMI
filters. The company also provides EMI filters for a variety of other
applications, including digital fire alarms and special LED lighting
setups used in MRI and other shielded rooms. Many of these
versions are available and in stock at ITG Electronics' Elmsford,
NY facility.
Key technical advancements are planned for the factory. It will operate
its electricity needs with 100% renewable energy, supported
by power from a new offshore wind farm. Also, it will respond to
the labor shortage that has confronted the domestic manufacturing
industry in Japan in recent years by building a futuristic factory
that achieves labor saving in the production processes, says the
company.
ITG Electronics Introduces Improved Dataline
and EMI Filters for Shielded MRI Rooms
In this latest series, a CAT6a grade filter enables high noise attenuation
that reduces noise by 100dB from 10MHz to 10GHz.
The result is a quiet, clean signal in an environment where sensitive
equipment must provide exacting, interference-free measurements.
Notably, the series' multi-channel capabilities yield
more efficient, space-saving data filtering operations with fewer
shielded room penetrations.
For more information of ITG TLVR Inductor offering, visit www.
ITG-Electronics.com/category/1 or email sales@ITG-Electronics.
com
Multi-Channel 1.5A CAT6a Dataline and Power-overEthernet
EMI Filters offer upgraded performance
over lower frequency spectrum; new series also is
easier to install and integrate.
ITG Electronics, a manufacturer of inductors and
transformers since 1963, has introduced a new
and improved version of its signature series of
Data Line and Electromagnetic Interference (EMI)
Filters. The company's F2780Y001L-02X Series offer
enhanced performance over a lower frequency
spectrum. In addition, an input-side keystone jack
helps make them easier to install and integrate.
www.MagneticsMag.com
November/December 2022 * Magnetics Business & Technology 21

http://www.ITG-Electronics.com/category/1 http://www.ITG-Electronics.com/category/1 http://MEDA.COM http://www.MagneticsMag.com

Magnetics Business & Technology - November/December 2022

Table of Contents for the Digital Edition of Magnetics Business & Technology - November/December 2022