WIREMOLD RC4 SERIES™ POKE-THRU DEVICES RC4 Series Poke-Thru Devices Ordering Information COM75 Communication Adapter PART NUMBERS: 8 1/4" [210mm] Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Assembled Poke-Thru Device PART NUMBERS: 8 1/4" [210mm] RC4ATCAA (All Aluminum) RC4ATCAB (All Brass) RC4ATCGY (Gray) RC4ATCBK (Black) RC4ATCAL (Aluminum) RC4ATCBS (Brass) 16 3/8" [416mm] Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as a separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. NOTE: If wiring for Isolated Ground, attach orange IG label (supplied). NOTE: RC4 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Abandonment Plate PART NUMBERS: 6 1/4" [159mm] Provides two 3/4" trade size threaded openings to accommodate conduit connections. RC4CTCAA (All Aluminum) RC4CTCAB (All Brass) RC4CTCGY (Gray) RC4CTCBK (Black) RC4CTCAL (Aluminum) RC4CTCBS (Brass) RC4APTCGY (Gray) RC4APTCBK (Black) RC4APTCBS (Brass) Retrofit Kit PART NUMBERS: 8 1/4" [210mm] RC4KTCBK (Black) RC4KTCGY (Gray) RC4KTCAL (Aluminum) RC4KTCBS (Brass) Used to upgrade existing installations of RC4 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes two 20A duplex receptacles that can be wired as a standard duplex or isolated ground. Also includes scrub water finish flange and slide holder assembly. See installation instructions with retrofit kit for complete installation details. NOTE: Existing installations of RC4 Poke-Thru Devices are not required to be upgraded to meet carpet scrub water requirements, if manufactured prior to June 2003. NOTE: RC4 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. RC4REC2, RC4REC2-25 Replacement Receptacles Two prewired 20A duplex receptacles can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details. RC4REC2-25 is available with 25 foot [7.62m] leads. ABPLUG4 Abandonment Plug Assembly Complete plug assembly for abandoning an open 4" [102mm] diameter hole. Assembly includes 3 7/8" [98mm] intumescent fire-stop material to maintain the fire classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black die-cast aluminum cover. 7 1/2" [191mm] NOTE: To abandon the RC4 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the core-drilled hole. WWW.LEGRAND.US/WIREMOLD POKE-THRU DEVICES Finish Flange & Slide Holder Assembly 365http://WWW.LEGRAND.US/WIREMOLD