In Broadcast - NAB Show New York 2019 - 11

11

16-17 October 2019 InShow Guide - NAB Show New York | www.inbroadcast.com

LYNX Technik yellobrik 8K
Fiber Transmission
8K Fiber Transmission System
The LYNX Technik yellobrik (model:
OTR 1A41) 8K fiber transmission
system solves the challenge of
transporting real-time, uncompressed
8K content (up to 48G) over long
distances with zero signal degradation
or loss. The standalone, self-contained
kit includes all the parts needed
to send 8K uncompressed video
over a single fiber link. It consists
of four independent 12G/3G/HD/
SD-SDI channels with each channel
individually reclocked and supporting
resolutions up to 2160p/60Hz. The kits
include the 8K optical transmitter, 8K
optical receiver and power supply.
The solution can also be combined
with existing yellobrik bi-directional
transceivers to add Ethernet signals or
RS232/RS422/RS485 signals to the 8K
fiber link.
This OTR 1A41 yellobrik
supports uncompressed video at
full 7680x4320 50/59.94/60 Hz
resolutions with zero delay and
complements LYNX Technik's

OTR 1442 and OTR 1441 solutions.
Full audio support makes this 8K
transmission set a fully-featured
solution. The modules transparently
transport all embedded audio,
metadata and ancillary data which
is present in each of the four
independent SDI streams.
This system can be used as
standalone or mounted onto 19-inch
yellobrik rack trays.
8K SDI <> Fiber Converter
LYNX Technik also has available its
8K SDI to Fiber and Fiber to 8K SDI
converter for its Series 5000 product
line.
The DVD 5480 HO module supports
video formats all the way up to 8K
SDI and are designed with both a
fiber and electrical interface. The

module provides four 12G SDI bidirectional electrical input/outputs
on high-density Micro-BNCs and four
12G SDI optical input and output in
four pairs of optical TR slots.
These rugged and versatile
cards are suitable for a variety
of applications and can operate
in four different modes, offering
unmatched flexibility.
As an 8K SDI <> fiber converter, the
module transports and converts up
to 8K-SDI (12G, 6G, 3G, HD, SD) over
optical fiber cable and vice-versa.
Operating as a 12G-SDI re-clocking
distribution amplifier, the module
carries 4K video on a single cable and
is suitable for any SDI video signal up
to 12G for 4K applications.
This new Series 5000 card also
enables single-link 12G SDI signals

The DVD 5480 HO
module supports
video formats
all the way up to
8K SDI

LYNX Technik yellobrik - OTR 1A41 - 8K
Fiber Transmission Set (Tx / Rx)

to be converted to quad-link 3G-SDI
and vice versa (i.e. quad-link 3G-SDI
signals to be converted to singlelink 12G-SDI). 6G to/from quad-link
1.5G conversions are also supported.
With many facilities still running in
a 3G environment, there are many
requirements to integrate 4K/
UHD signals in 12G-SDI into the
infrastructure. In this mode, the DVD
5480 HO module enables users to
convert UHD signals between quadlink 3G and single-link 12G SDI.
www.lynx-technik.com
http://www.inbroadcast.com http://www.lynx-technik.com https://www.lynx-technik.com/
In Broadcast - NAB Show New York 2019

Table of Contents for the Digital Edition of In Broadcast - NAB Show New York 2019
