SAE Update - July 2022 - 25

TECH FOCUS:
ADDiTivE MANUFACTUriNg
machining for producing low volumes of
complex parts. While some of these parts
may be used for safety-critical functions,
their complex nature means they are less
suited to conventional inspection
techniques, for example, eddy currents or
ultrasonics. X-ray micro-computed
tomography (µCT) is the only technique
that gives a full three-dimensional
quantitative picture of the structure of a
part, both internal and external, showing
density variations, dimensional mismatches,
voids, and inclusions, and allows accurate
measurements of these to be made.
A 30-minute On Demand webinar called
" Using High-Resolution
X-ray Computed
Tomography to Inspect
Additive Manufactured
Parts " will explain how µCT
works and how the full 3D
inspection of complex AM
parts can give users
confidence in this exciting
new technology. Speakers
for the webinar are Andrew
Ramsey, X-ray CT
Consultant, Nikon
Metrology; and Chris
Peitsch, Business
TABLE OF CONTENTS
VOLUME 15, ISSUE 1, 2022
Influence of Graphene Nanoplatelets Addition
on Microstructural and Mechanical Properties of
Pure Aluminum through Ultrasonic-Assisted Stir
Casting Technique
P. Bhanu Prakash, K. Venkata Subbaiah, Ravikanth Dodda,
V.S.S. Murthy, and Shangar R. Vagesh | 3
Experimental Measurement of Material Stability
of 2024 T351 Aluminum Alloy for Weight
Measurement Applications
Khaleel Abushgair, Aiman Al Alawin, Fadi Anton Alfaqs,
and Mohammad Al-Hasan | 13
Reliable and Robust Optimization of the Planetary Gear
Train Using Particle Swarm Optimization and Monte
Carlo Simulation
Abderazzak Ziat, Hamid Zaghar, Abdelmajid Ait Taleb,
and Mohammed Sallaou | 21
Effect of Thermal Conditions on Fatigue Resistance of
One Automotive Day Time Running Light Housing Made
of Polycarbonate Material
Barış Ediz and Mehmet Aktaş | 35
Effects of Heat Input on Microstructure and Mechanical
Properties of Dissimilar Laser-Welded Dual-Phase and
Boron Steel Joints
Isiaka Akanbi Aderibigbe, Patricia Abimbola Popoola,
Rotimi Emmanuel Sadiku, and Elliot Biro | 51
Computational Measurement of Various Metrics
and Mode Shapes of a Polymer-Based Centrifugal
Pump Impeller
Ankit Saxena and Sushila Rani | 71
Parametric Optimization of Electro Discharge Process
during Machining of Aluminum/Boron Carbide/
Graphite Composite
Mumtaz Rizwee, P. Sudhakar Rao, and
Md Fuzail Ahmad | 81
ISSN 1946-3979
SAE INTERNATIONAL JOURNAL OF
MATERIALS AND
MANUFACTURING
9 771946
397004
Andrew ramsey
Chris Peitsch
Development Manager, X-ray/CT Systems,
Avonix Imaging.
The webinar will be available until
November 11, 2022.
Click here for more information about
webcasts and webinars.
UPDATE
ISSN 1946-3979
2022
VOLUME 15 | ISSUE 1
SAE INTERNATIONAL JOURNAL OF
MATERIALS AND
MANUFACTURING
Editor-in-Chief
DR. YUNG-LI LEE
Journal
The SAE International Journal of Materials
and Manufacturing publishes peerreviewed,
authoritative, and in-depth
research in the areas of materials, design,
testing, and manufacturing. In addition to
analytical findings, the journal addresses
integration and implementation of
scientific and engineering practices that
advance the state of the art and benefit
society. The journal presents and promotes
wide-ranging research in the four broad
areas of materials, design, testing, and
manufacturing.
Insights into additive manufacturing may
be found in some other 13 SAE journals.
Click here for the full list of them.
Podcasts
From U.S. aircraft parts to medical
implants, additive manufacturing is a
July 2022
25
VOLUME 15 | ISSUE 1 | FEBRUARY 2022
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING
Cover image used under license from Shutterstock.com
https://www.sae.org/publications/collections/content/E-JOURNAL-05/ https://www.sae.org/publications/collections/content/E-JOURNAL-05/ https://www.sae.org/publications/journals https://www.sae.org/webcasts
SAE Update - July 2022

Table of Contents for the Digital Edition of SAE Update - July 2022
