Tech Briefs Magazine - February 2021 - 48

New on the

MARKET
Product of the Month

Concepts NREC, White River Junction, VT, released the Agile Engineering Design System®, an integrated
suite of software modules for CAE/CAM of turbomachinery. New CAM capabilities are the introduction of new
toolpaths for roughing gas turbine components using T-shaped slotting disc cutters, improvements for machining inducers and other components such as rocket engine turbopumps, and an optional module for machine
simulation. CAE enhancements are a new model for choke prediction in diffusers, the ability to design and analyze mixed-flow turbines, the
ability to import legacy axial blades from other systems and design drooped leading edges for axial machines, and additional capabilities to
design and analyze secondary flow passages. Design and modeling capabilities are provided in a single user-friendly interface that runs natively on Linux and Windows, allowing seamless transfers of data between modules.
For Free Info Visit http://info.hotims.com/79410-120

Disconnect Terminal Blocks

High-Speed Connectors

Dinkle International, Stafford, TX, offers DPT
DIN rail disconnect terminal blocks for safe disconnect and testing of current transformer (CT)
and voltage transformer (VT) circuits. The terminal blocks provide DIN rail mounting with no tools required and let
the user test the circuit current without undoing wired connections.
The blocks are UL rated up to 30 amps at 600 VAC.

Stewart Connectors, Glen Rock, PA, introduced Mid-Plane RJ45 connectors for servers/
switches and portable storage devices. The connectors straddle the board edge and utilize
space above and below the printed circuit board. They support 1- and
2.5-G data rates and 100-MHz transmission frequencies. The connectors
are available in 1×1 and 1× 4 configurations.

For Free Info Visit http://info.hotims.com/79410-100

For Free Info Visit http://info.hotims.com/79410-104

Oscilloscope Probes

Multicomponent Sensors

Tektronix, Beaverton, OR, announced IsoVu™ TIVP
Series isolated oscilloscope probes for measurements
on high-speed ungrounded systems. The probes are
galvanically isolated from the oscilloscope for wide
bandgap power measurements. They use electro-optical technologies to capture signals and power the probes without the
need for an electrical connection to the oscilloscope.

Hottinger Brüel & Kjaer, Darmstadt, Germany,
launched MCS10-200 multicomponent sensors that
are suitable for nominal loads of 40 kN for Fx/Fy, 200
kN for Fz, 3.5 kNm for Mx/My, and 3.0 kNm for Mz.
The sensors offer IP67 protection, low crosstalk, compensation matrixes,
and a wide temperature range. They are suitable for automotive, aerospace, industrial assembly, production line, and robotics applications.

For Free Info Visit http://info.hotims.com/79410-110

For Free Info Visit http://info.hotims.com/79410-105

Test Module

Signal/Spectrum Analyzer

Marvin Test Solutions, Irvine, CA, offers the
GX3756 FPGA-based card with 56 channels of TTL
I/O signals, delivering TTL I/O, data streaming, and
connector/cable identification in a 3U PXI hybrid
slot compatible instrument. It consists of a daughter
card and the card that employs the Altera Stratix III
FPGA. A ruggedized version deploys test systems in extreme, harsh
environments.

Rohde & Schwarz, Columbia, MD, introduced the FSVA3000 mid-range signal and
spectrum analyzer with internal analysis bandwidth of 1 GHz. In combination with the supported 5G NR downlink and uplink measurement options, the instrument
analyzes 5G NR signals with several component carriers and supports aerospace and defense and automotive applications. The analyzer supports
measurement of short rise and fall times (down to 1 ns system rise time)
and detection of ultrashort pulses.

For Free Info Visit http://info.hotims.com/79410-102

For Free Info Visit http://info.hotims.com/79410-108

Disconnect Switches
Connectors

Littelfuse, Chicago, IL, announced the LS6
and LS6R DC disconnect switches that break or
resume the flow of current safely. Offered in
250 and 400 amperage ratings, the switches prevent shock hazards
when isolating circuits or repairing systems. They require no external
bridging links or jumpers and minimize damage caused by arcs upon
disconnection. Features include self-cleaning blade contacts and an
internal sandwich-type 2-contact symmetrical design.

The S-coded and T-coded connectors from
Binder USA, Camarillo, CA, are suited for applications such as supplying power to motors and
drives. Both connectors come with the M12 interlock as standard and
meet the DIN EN 610276-2-111 standard. The 814 Series S-coded connectors are intended for use in AC supplies up to 630 VAC; 813 Series Tcoded connectors are used for DC voltages up to 63 VDC at 12 A.

For Free Info Visit http://info.hotims.com/79410-103

For Free Info Visit http://info.hotims.com/79410-107

www.techbriefs.com

Cov

ToC

Tech Briefs, February 2021

http://info.hotims.com/79410-120 http://info.hotims.com/79410-100 http://info.hotims.com/79410-104 http://info.hotims.com/79410-110 http://info.hotims.com/79410-105 http://info.hotims.com/79410-102 http://info.hotims.com/79410-108 http://info.hotims.com/79410-103 http://info.hotims.com/79410-107 http://www.techbriefs.com http://www.abpi.net/ntbpdfclicks/l.php?202102TBNAV

Tech Briefs Magazine - February 2021

Table of Contents for the Digital Edition of Tech Briefs Magazine - February 2021