Aerospace & Defense Technology - February 2022 - 46

New Products
CAD/CAM Software
Kontron (Ismaning, Germany) has
expanded its PiXtend® product range by
supporting the engineering software logi.
CAD 3 from the company logi.cals and
the Spider Control I4.0 Integration Suite
from iniNet. With Pi-Tron and PiXtend®,
the advantages of the Raspberry Pi can be
combined with the engineering platform logi.CAD 3 from logi.cals.
Sophisticated control applications for industrial automation solutions
can be programmed according to the IEC 61131-3 industry standard
in the ST, FBD, LD and SFC programming languages. State-of-the-art
source code management systems and code review systems are supported,
and it is possible to connect to issue tracking systems.
For Free Info Visit http://info.hotims.com/82318-470
10-Gigabit Ethernet XMC Module
Acromag's (Wixom, MI) new XMC633
module offers two independent 10-gigabit
Ethernet interface ports with
10GBASE-KX4 protocol. The XMC mezzanine
card mounts on VME, VPX, PCIe
and other embedded computing carrier boards.
An Intel® XL710 Ethernet Controller provides high-performance
network connectivity with advanced off-load and virtualization
capabilities. The rear I/O model XMC633 routes two KX4
interfaces to the P16 connector and is compatible with conduction-cooling
frames. Two other models are available. The previously
released XMC631 model has four SFP+ front panel connectors for
fiber optic or copper media transceivers, while the rear I/O model
XMC632 routes two XAUI interfaces to P16. Optional VITA 61 connectors
enable PCIe Gen3 data rates across eight high-speed serial
lanes on the XMC P15 connector.
For Free Info Visit http://info.hotims.com/82318-471
High-Speed 3U VPX Synchronizer Module
Mercury Systems,
Inc.
(Andover, MA) announced
the Model 5503 Sensor Open Systems
Architecture™ (SOSA) aligned high-speed 3U VPX
synchronizer module (a SOSA plug-in-card). The
Model 5503 is an optimized commercial-offthe-shelf
(COTS) solution that simplifies complex
synchronization tasks for beamforming and
phased-array applications used in radar, electronic
warfare, and communications. The module can
synchronize up to 32 channels across four RF
system-on-chip (RFSoC) Quartz® modules. Four
sets of programmable clock and timing signals for synchronizing,
triggering and gating functions are routed to each Quartz module
across the backplane, eliminating front-panel connections, while
a rear transition module delivers synchronization signals to four
additional modules.
For Free Info Visit http://info.hotims.com/82318-472
Thick Film Shunt Resistors
ROHM Semiconductor (Kyoto, Japan)
introduced their new thick-film shunt
resistors, LTR100L, optimized for industrial
and consumer applications. Often used
to detect current in battery protection
and motor drive circuits, shunt resistors
require higher accuracy to improve reliability
and ensure high-efficiency operation.
The LTR100L series achieves rated power of 4W in the 3264 size
(3.2 mm × 6.4 mm) / 1225 size (0.12 inch × 0.25 inch) by revising
resistor materials and applying terminal temperature derating. This
makes them suitable for current detection in motor control and overcurrent
protection circuits for industrial and consumer applications,
which are progressing towards higher power.
For Free Info Visit http://info.hotims.com/82318-473
46
Wireless Torque Sensor
Sensor Technology (Banbury, UK) has
extended its new range of non-contact
torque sensors up to 13,000 Nm. The
new sensors, designated the SGR510/520
series, use a full four element strain
gauge bridge design. The new design also
compensates for any extraneous forces,
such as bending moments, inadvertently
applied to the sensor, improves sensitivity, and has a wide temperature
tolerance. An ultra-miniature microcontroller, mounted on a rotor
and powered by an inductive coil, measures the differential values
in each strain gauge and transmits them back to the stator digitally,
via the same coil. State of the art strain gauge signal conditioning
techniques are then used to convert raw live data into precise torque
value measurements.
For Free Info Visit http://info.hotims.com/82318-474
CAD/CAM Software Suite
OPEN MIND Technologies AG (Needham,
MA) has introduced its latest hyperMILL®
2022.1 CAD/CAM software suite
that offers users new and enhanced features
for even more powerful NC programming
in applications ranging from
2.5D to 5-axis. Highlights in hyperMILL®
2022.1 include a new break-edge function for contour milling, combined
pocket milling together with a finish path allowing cutter compensation,
and increased efficiency for 3D plane machining. The new
automated 3D plane machining strategy improves machining quality
by searching for suitable, high performance path layouts according to
parameters including when adaptive pockets are present. For improved
tool data reliability and time savings, tool data such as length, radius,
corner radius, and tool number and name, can be transferred directly
from hyperMILL® to a Heidenhain TNC640 control using the hyperMILL®
CONNECTED Machining module.
For Free Info Visit http://info.hotims.com/82318-475
Compact HD Lens
Resolve Optics Ltd. (Chesham, UK) has
developed a new rugged High Definition
(HD) lens optimized for use in Head-Up
Display (HUD) systems. Resolve Optics has
taken the approach of designing a small
compact zoom design that covers the majority
of the aircraft that require HUD system
recording. The zoom design can be used
to set the lens at a desired FOV and locked.
This means no matter what aircraft you need a HUD system for you will
already have an optimized lens that can accommodate the correct FOV.
Resolve Optics HD HUD lens has been designed and tested to withstand
the high levels of vibration, shock typically found in aircraft.
For Free Info Visit http://info.hotims.com/82318-476
Multiphysics Software Platform
COMSOL (Burlington, MA) has
released version 6.0 of the COMSOL Multiphysics®
software. This release introduces
the Model Manager, a new workspace
in COMSOL Multiphysics that enables
efficient simulation data management
and collaboration. Also introduced with
version 6.0 is the Uncertainty Quantification
Module. This is a new add-on product to COMSOL Multiphysics
that uses probabilistic design methods to quantify uncertainty in
analyses and predetermined safety margins. Version 6.0 further brings
major improvements to the solvers with performance speedup by a
factor of 10 in engineering areas such as heat radiation and models
subjected to nonlinear structural material behavior.
For Free Info Visit http://info.hotims.com/82318-477
www.aerodefensetech.com
Aerospace & Defense Technology, February 2022
ADT New Products 0222_1.indd 46
Intro
Cov
ToC
+
-
A
µ
1/25/22 2:58 PM
È
http://info.hotims.com/82318-470 http://info.hotims.com/82318-474 http://info.hotims.com/82318-471 http://info.hotims.com/82318-475 http://info.hotims.com/82318-472 http://info.hotims.com/82318-476 http://info.hotims.com/82318-477 http://info.hotims.com/82318-473 http://www.aerodefensetech.com http://info.hotims.com/82318-811

Aerospace & Defense Technology - February 2022

Table of Contents for the Digital Edition of Aerospace & Defense Technology - February 2022

Aerospace & Defense Technology - February 2022 - Intro
Aerospace & Defense Technology - February 2022 - Sponsor
Aerospace & Defense Technology - February 2022 - Cov1
Aerospace & Defense Technology - February 2022 - Cov2
Aerospace & Defense Technology - February 2022 - 1
Aerospace & Defense Technology - February 2022 - 2
Aerospace & Defense Technology - February 2022 - 3
Aerospace & Defense Technology - February 2022 - 4
Aerospace & Defense Technology - February 2022 - 5
Aerospace & Defense Technology - February 2022 - 6
Aerospace & Defense Technology - February 2022 - 7
Aerospace & Defense Technology - February 2022 - 8
Aerospace & Defense Technology - February 2022 - 9
Aerospace & Defense Technology - February 2022 - 10
Aerospace & Defense Technology - February 2022 - 11
Aerospace & Defense Technology - February 2022 - 12
Aerospace & Defense Technology - February 2022 - 13
Aerospace & Defense Technology - February 2022 - 14
Aerospace & Defense Technology - February 2022 - 15
Aerospace & Defense Technology - February 2022 - 16
Aerospace & Defense Technology - February 2022 - 17
Aerospace & Defense Technology - February 2022 - 18
Aerospace & Defense Technology - February 2022 - 19
Aerospace & Defense Technology - February 2022 - 20
Aerospace & Defense Technology - February 2022 - 21
Aerospace & Defense Technology - February 2022 - 22
Aerospace & Defense Technology - February 2022 - 23
Aerospace & Defense Technology - February 2022 - 24
Aerospace & Defense Technology - February 2022 - 25
Aerospace & Defense Technology - February 2022 - 26
Aerospace & Defense Technology - February 2022 - 27
Aerospace & Defense Technology - February 2022 - 28
Aerospace & Defense Technology - February 2022 - 29
Aerospace & Defense Technology - February 2022 - 30
Aerospace & Defense Technology - February 2022 - 31
Aerospace & Defense Technology - February 2022 - 32
Aerospace & Defense Technology - February 2022 - 33
Aerospace & Defense Technology - February 2022 - 34
Aerospace & Defense Technology - February 2022 - 35
Aerospace & Defense Technology - February 2022 - 36
Aerospace & Defense Technology - February 2022 - 37
Aerospace & Defense Technology - February 2022 - 38
Aerospace & Defense Technology - February 2022 - 39
Aerospace & Defense Technology - February 2022 - 40
Aerospace & Defense Technology - February 2022 - 41
Aerospace & Defense Technology - February 2022 - 42
Aerospace & Defense Technology - February 2022 - 43
Aerospace & Defense Technology - February 2022 - 44
Aerospace & Defense Technology - February 2022 - 45
Aerospace & Defense Technology - February 2022 - 46
Aerospace & Defense Technology - February 2022 - 47
Aerospace & Defense Technology - February 2022 - 48
Aerospace & Defense Technology - February 2022 - Cover3
Aerospace & Defense Technology - February 2022 - Cover4
https://www.nxtbook.com/smg/techbriefs/24ADT02
https://www.nxtbook.com/smg/techbriefs/23ADT12
https://www.nxtbook.com/smg/techbriefs/23ADT10
https://www.nxtbook.com/smg/techbriefs/23ADT09
https://www.nxtbook.com/smg/techbriefs/23ADT08
https://www.nxtbook.com/smg/techbriefs/23ADT06
https://www.nxtbook.com/smg/techbriefs/23ADT05
https://www.nxtbook.com/smg/techbriefs/23ADT04
https://www.nxtbook.com/smg/techbriefs/23ADT02
https://www.nxtbook.com/smg/techbriefs/22ADT12
https://www.nxtbook.com/smg/techbriefs/22ADT10
https://www.nxtbook.com/smg/techbriefs/22ADT09
https://www.nxtbook.com/smg/techbriefs/22ADT08
https://www.nxtbook.com/smg/techbriefs/22ADT06
https://www.nxtbook.com/smg/techbriefs/22ADT05
https://www.nxtbook.com/smg/techbriefs/22ADT04
https://www.nxtbook.com/smg/techbriefs/22ADT02
https://www.nxtbook.com/smg/techbriefs/21ADT12
https://www.nxtbook.com/smg/techbriefs/21ADT10
https://www.nxtbook.com/smg/techbriefs/21ADT09
https://www.nxtbook.com/smg/techbriefs/21ADT08
https://www.nxtbook.com/smg/techbriefs/21ADT06
https://www.nxtbook.com/smg/techbriefs/21ADT05
https://www.nxtbook.com/smg/techbriefs/21ADT04
https://www.nxtbook.com/smg/techbriefs/21ADT02
https://www.nxtbookmedia.com