september2022 - 35

Capable of 45 jump-starts on a single charge
The TOPDON JumpSurge3000 is a 3,000 peak amp
jump-starting tool and power bank for vehicles on
and off the road. The device supports vehicles with
12V batteries on up to 9L gas engines and 7L diesel
engines. Capable of 45 jump-starts on a single
charge, the JS3000 also has a boost function for
difficult jumps and provides fast charging for devices
such as laptops, cell phones, and more. Additionally,
it features a 400-lm LED flashlight, sturdy outer housing
that resists water, dust, and wear, and has a Stop
Spark Sensor that suspends its use after too many
jumps in a 10-minute period.
For more information visit FleetMaintenance.com/21262889
Performs vacuum and pressure brake bleeding,
transmission refilling, and more
The Mityvac MV7100 Series Fluid Evacuators/Dispensers are designed
for use in vehicle service and heavy-duty trucking applications, but are also
suitable for agricultural, marine, industrial, and small engine repair service.
With assorted accessories, one tool is able to perform multiple tasks,
including vacuum, pressure brake, and clutch bleeding; transmission refilling
and top-off; cooling system evacuation and dispensing; engine oil and
power steering fluid reservoirs; diesel fuel system priming; and more.
For more information visit FleetMaintenance.com/21254534
Able to measure, record, and playback compression readings
The OTC Deluxe Digital Compression Tester Kit, No. 5605-DG, is
designed to help determine the mechanical condition of the engines'
cylinders. The digital gauge is easy to read and can display pressures
in psi, kPA, bar, and kg/c. It can also measure, record, and playback
compression readings on up to 12 cylinders for quicker testing and diagnosis.
Specialized adapters work on both flat and tapered seat plugs. A
convenient push-button side release valve relieves pressure for repeat
testing. The kit includes standard and specialty adapters, including the
deep well connector used on recessed plug well style heads and the
Ford Triton engine adapter using 16mm thread plugs.
For more information visit FleetMaintenance.com/21246001
For use on Mack and Volvo suspensions
Facilitates faster, smoother gear shifting
Jacobs Vehicle Systems upgraded the company's
engine brake, the Jake Brake, on model year 2021
Paccar MX-11 heavy-duty diesel engines. The electronically-controlled
engine brake now includes a new
high-flow solenoid to facilitate faster, smoother gear
shifting, resulting in simplified and smoother vehicle
operation as well as fuel consumption improvements.
Drivers will enjoy a smoother driving experience.
For more information visit FleetMaintenance.com/21265040
The ESCO Leaf Spring Socket, No. 40309, is designed for use on
Mack and Volvo suspensions. The socket is machined with precision
to ensure accuracy and consistency and is finished with an
anti-corrosive black oxide finish to increase corrosion resistance.
It's compatible with a 1/2 " drive.
For more information visit FleetMaintenance.com/21236730
Separates solid contaminates from main oil supply
Comes with sensor, new bung,
weld-on plate, and zip tie
This Dorman Products OE FIX Exhaust Gas
Temperature (EGT) Sensor, No. 904-7134, directly
replaces the sensor (OE Number 4984179) and comes
with a bung repair kit in case the bung is damaged
during removal. The bung repair kit allows direct
repair of a damaged bung instead of replacing the
entire exhaust pipe. The kit comes with a sensor, new
bung, weld-on plate, and zip tie.
For more information visit FleetMaintenance.com/21274831
Dieselcraft Fluid Engineering developed the OC-25 Cyclone
Series Centrifuge for internal combustion gas and diesel
engines. Engine oil pressure spins the centrifuge rotor at a rate
up to 6,000 rpms, generating a centrifugal force 2,000 times
greater than gravity. That force separates the solid contaminants
from the main oil supply. Contaminant particles less
than 2 microns are removed, eliminating the wear and tear
on close-tolerance metal parts. The solids/soot is stuck to the
inside of the rotor, which is easily cleaned at over 15,000 miles.
The OC-25 only requires a 1/4 NPT tapped hole to return oil to
the engine. It has a universal mounting plate and comes with all
the needed hoses and fittings. Minimum requirements are any
engine with a sump of at least 5 quarts (no maximum) and 12V.
For more information visit FleetMaintenance.com/21274779
For Ford gas 4.6L, 5.4L, and 6.8L engines
The ProMAXX Rocky ProKit is designed to assist the automotive technician in
reducing cost, risk, and liability in the repair and replacement of broken exhaust
manifold mounting studs. It's for Crown Victoria, Mercury Grand Marquis,
Mountaineer, Ford Explorer, SportTrac, F-series, Super Duty Ford trucks, Ford
Econoline Vans, and Ford drive chassis. Rocky offers speed, efficiency,
and accuracy in drilling and subsequent assistance in the removal of the
remaining portion of a damaged exhaust manifold mounting stud. There's
no need to use a center punch to mark the damaged stud, the company
said. It can be mounted in any of eight orientations, accessing every stud.
For more information visit FleetMaintenance.com/21224826
September 2022 | FleetMaintenance.com
35
http://www.FleetMaintenance.com/21254534 http://www.FleetMaintenance.com/21262889 http://www.FleetMaintenance.com/21246001 http://www.FleetMaintenance.com/21236730 http://www.FleetMaintenance.com/21265040 http://www.FleetMaintenance.com/21274779 http://www.FleetMaintenance.com/21274831 http://www.FleetMaintenance.com/21224826 http://www.FleetMaintenance.com
september2022

Table of Contents for the Digital Edition of september2022
