toolandequipmentsupplement-april2023 - 28

SHOP EQUIPMENT
Tool Review
Clore Automotive SOLAR 12V
100A Flashing Power Supply and
100/40/10A Battery Charger
Reviewed by Eric Moore, fleet manager at Griffin
Pavement Striping in Columbus, Ohio.
Q: How did the tool/equipment function as far as saving
you time?
A: This power supply is fantastic for ensuring that voltage is
maintained at a constant level while performing critical updates
or flash programming. Without the variations in voltage
to interrupt the process, things proceed smoothly and
quickly. The capability of recovering and charging batteries
is also extremely convenient. Especially the 100A option.
Q: What kind of setup was involved before using
the product?
A: The power supply comes with a special AC cord that your
typical outlets may not accept. We decided to outfit a 24 " ,
12-gauge extension cord with the correct end to accept the
plug. We also keep the extension cord in a secure location.
This way the power supply is less likely to be used incorrectly
by staff not instructed in its proper use.
Q: How easy was it to use?
A: The power supply is very easy to use, and the controls are
almost self-explanatory. Choose whether you would like to
charge a battery or provide clean, steady power. If charging,
select the battery type and the amperage level for the charge.
When providing 12vdc power, select the voltage you need to
stay constant and press the start button.
Q: What features did you like?
A: Being able to recover discharged batteries is a great
feature. It saved us a few dollars by not replacing batteries
that we considered unusable. The smart features on the
unit allowed our tech to set it up and walk away while it
was either charging or providing power. Previous tools or
chargers always needed babysitting to ensure they hadn't
timed out or weren't set up incorrectly.
Q: Is there any way you could think to improve or add
to this tool?
A: If I had to pick something, my only complaint is that
the clamps could have stiffer springs. They are actually
very good, but I just prefer a more robust clamp.
This product was given to the reviewer free of charge by the manufacturer.
VT TRUCK 2.0
VT67 HD
VT57 HD
Performs MIG, Flux-core, Stick, and TIG welds
The Forney 220 Multi-Process (MP) Welder is a 4-in-1
machine capable of MIG, Flux-core, Stick, and TIG welding.
This powerful welding machine features dual-voltage with
120V/240V input power. With a high welding capacity of
1/2 " and 220 AMPs of welding power, this unit is best for
use on steel, stainless steel, cast iron, and aluminum (with
spool gun). This machine is rugged and technologically
advanced with a digital display and all-metal drive system.
For more information visit FleetMaintenance.com/21277400
28 Tools & Shop Equipment * April 2023
2304FMSTE_ATEQ-TPMS.indd 1
3/8/23 10:38 AM
http://www.ateq-tpms.com https://indd.adobe.com/view/6ab21728-ffd7-4692-9479-f0fc02b12237 http://www.FleetMaintenance.com/21277400
toolandequipmentsupplement-april2023

Table of Contents for the Digital Edition of toolandequipmentsupplement-april2023
