Screen Printing - August/September 2019 - 10

DRYER PRODUCT SPOTLIGHT
In a moderate- or high-production printing environment, a dryer is a mainstay piece of equipment to
effectively cure inks and efficiently move your printed products out the door to the paying customer.
It's a ubiquitous tool of the trade. Here are just a handful of conveyor dryers recently released to market.

ADELCO PRO-CURE
HIRSCH SOLUTIONS | hsi.us
Details: Electric textile conveyor dryers for use with all digital and
conventional textile inks; Extractor+ technology to maintain energy
efficiency; vacuum pulldown prevents fabric and transfer paper from
being lifted or flipped; built-in hood extraction prevents fumes from
exiting the dryer as garments move in and out of the oven; touch-screen
interface; removable end panels; lint filter that can be cleaned while the
dryer is in operation; and available in a variety of belt widths and lengths

M2-ENCORE
LAWSON | golawson.com
Details: Entry-level, compact, electric dryer for curing plastisol,
water-based, and discharge inks; cures at speeds up to 260 shirts/hr;
independent temperature controllers with a 6000-watt min. for control
over each IR panel zone; high-temperature fiberglass insulation throughout the heat chamber; and a full-wrap design to circulate warm air and
keep heat inside the chamber

VESTA
RYONET | screenprinting.com
Details: Forced-air conveyor dryer combines BBC heating elements and
a design that uses a heat exchanger to use fresh rather than recirculated
air; uses long-wave infrared technology; a 40-in. heating bank; 36-in.-wide
TruTrak belt with 4-ft infeed and 2-ft outfeed; digital heat control with
two zones (flash and heat maintenance); digital speed control for
chamber heat monitoring; and an automated shut-off function that runs
the dryer belt until the unit is cool, saving belt wear

LITTLE REDX1D
VASTEX | vastex.com
Details: Compact, 18 x 48-in. infrared conveyer dryer; heater spans the
entire belt width; curing speeds of 27 garments/hr for DTG printing with
white ink, 81 discharge or water-based screen-printed garments/hr, and
162 plastisol garments/hr; modifiable belt-to-heater clearance for bulky
objects; dual-digital PID temperature controller; power exhaust to
remove moisture and cool the machine; X-Series conveyor belt roller
tracking system; and optional additional heating chambers and belt
extensions, locking casters, and creeper gear

POWERHOUSE II
WORKHORSE PRODUCTS | workhorseproducts.com
Details: Conveyor dryers for curing plastisol, water-based, and other
inks on a variety of fabrics; updated, tablet-controlled software monitors
production costs per hour; a scrubbing air function designed to provide
softer heat and avoid scorching; adjustable height heaters; adjustable air
volume; and available in various sizes
10

SCREENPRINTING
http://www.hsi.us http://www.golawson.com http://www.screenprinting.com http://www.vastex.com http://www.workhorseproducts.com
Screen Printing - August/September 2019

Table of Contents for the Digital Edition of Screen Printing - August/September 2019
