AWCI’s Member Products Catalog 2017 - Ce3

Overview | Head of Wall Systems

CEMCO's
Head of Wall Systems
Slotted Track

Standard HOW Products

CEMCO's CST Brand slotted track and Sliptrack System's "SLP-TRK®"
brand slotted track are evaluated and approved for use by ICC in
report ESR-2012 .

* CEMCO Slotted Track "CST" & "SLP-TRK®" Brand Slotted Tracks

CEMCO's CST and Brady's SLP-TRK® branded slotted track are available
to the construction industry so that dealers will be able to satisfy the
high demand for products by architects, contractors, and engineers .
Both systems are proven solutions for seismic head-of-wall requirements all over the United States and abroad . Each product line will
have full sales and technical support through CEMCOs' Technical
Services Department .

FAS Track HOW Products

This co-branding agreement calls for each piece of slotted track you
receive to be labeled with both ICC-ESR numbers which simplifies the
purchasing, inventorying, sales and distribution for the wholesaler and
end user . Full traceability is guaranteed by the ink-jetting of material
tracking information commonly required by on-site inspectors, architects, and engineers . CEMCO's Head of Wall (HOW) products provide
for easy installation to meet seismic and fire rated requirements in your
commercial, institutional, hospital, and educational project .

* Deflection Drift Angle (DDA)

FAS® Track 1000 and DDA®
Fire Rated Head of Wall Solutions
The contractors and architects have spoken and CEMCO has responded
by introducing the latest iteration of the FAS Track product line "FAS
Track® 1000." FAS Track 1000 is the most efficient way to provide superior fire, smoke and sound protection within a composite deflection
track according to UL-2079 without the use of fire caulking . FAS Track
requires NO fire sealant or fire spray when used on solid concrete
construction or fluted pan decking for 1 and 2 hour fire rated walls .

* Exterior Slotted Track

* FAS Track 1000
* FAS Track 1000 DL
* FAS Track BT 1000
* FAS J-Track Shaft Wall
* Deflection Drift Angle-1 (DDA-1)
* FAS Strap

FAS Specialty Products
* TAB and TAB FAS Track
* FAS 093X Fire Rated Control Joint
* FAS 093X-V Fire Rated Control Joint - Vinyl
* FAS RBR (Rated Base Reveal)
* FAS Vertical Drift Joint
* HOTROD Type-X

With FAS Track 1000 you are guarenteed that once installed the intumescent tape will not wear off, tear off, or fall off, making it the most
reliable intumescent track on the market . On fluted deck applications
mineral wool can be replaced with spray applied fireproofing . This
assembly will not require any additional fire spray or caulking .

DDA®
US Patent #8,595,999 B1 (Deflection Drift Angle®) is a composite steel
angle with intumescent tape factory applied to the inside leg of the
steel angle . The DDA is a fire-rated accessory that when combined with
slotted or deep leg track will offer 2" unencumbered movement at the
end of the head-of-wall joint in accordance with UL-2079 "Test for Fire
Resistance of Building Joint Systems ." The 2-1/2" outside leg marked for
proper identification . The section is fabricated from minimum 0 .018inch thick hot-dipped red galvinized steel complying with ASTM A653
having minimum G-40 coating .

Head of Wall Systems | www.cemcosteel.com | 800.775.2362

1
http://www.cemcosteel.com
Table of Contents for the Digital Edition of AWCI’s Member Products Catalog 2017
