Marine Fabricator May/June 2021 - 16

Stayput die for the Hoover
Pres-N-Snap tool
" Traditionally, Stayput™ fasteners
are removed with a hammer and
a punch, " explains Allan Pfromm.
" Removing the panel from the boat
is time consuming and cumbersome. " The solution for Bayport
Marine Canvas was found by prototyping a die to fit the Pres-N-Snap
tool, allowing fabricators to quickly
and easily remove old or broken
Stayput fasteners while the panel is
still attached to the boat.

Sailrite Edge Cordless Hotknife
" A hotknife is a must when working with Sunbrella®
or to seal the ends of binding or zippers to prevent
unsightly fraying, " says Allan Pfromm. " The newest
addition to our tool arsenal is a cordless hotknife package. With the supplied quick charger and two lithium
batteries, our productivity never suffers while waiting
for a battery to charge. We are not restricted by a power cord and we have even taken the cordless hot knife
down to the dock to do a quick 'hot-cut' or two. "

Snap-On Cordless Screwdriver
A favorite tool of Bayport Marine Canvas is its Snap-on® cordless screwdriver,
p/n CTS761A, with a one-handed paddle trigger that allows for easy transition
from forward to reverse. " With the attachments, we can use this tool to easily tap
for threads, " says Allan Pfromm. " Setting the torque clutch setting to one or two
and using the index finger for forward and the middle finger for reverse allows
for a quick direction change while tapping threads into stainless steel. We also use
PTEF® lubricant to keep things from seizing up. "
Bayport Marina Canvas & Upholstery Shop | Allan Pfromm, canvas fabricator
Bayport, Minn.

Radius guide for rounded corners
Bill Marriott reports that this radius guide is a must-have in his shop. " I made
these for when I'm making round corners on cushions or canvas projects. I was
selling these at one time, " he says. The radius guides allow Marriott to be consistent when multiple parts need rounded corners. " I've seen people use paint/
glue cans or rolls of tape, even soda cans, to use as a guide to draw rounded
corners. When I'm prototyping seats for boats, I use these on the patterns and
they are marked with the radius size. This way I can tell the engineers the size
and nobody has to take time to measure each rounded corner. "
Extreme Upholstery Design LLC | William (Bill) Marriott, owner
Summerville, S.C.
Cathy Broberg is a writer and editor who lives near Minneapolis, Minn.

16 Marine Fabricator | May/June 2021



Marine Fabricator May/June 2021

Table of Contents for the Digital Edition of Marine Fabricator May/June 2021

Marine Fabricator May/June 2021 - Cover1
Marine Fabricator May/June 2021 - Cover2
Marine Fabricator May/June 2021 - 1
Marine Fabricator May/June 2021 - 2
Marine Fabricator May/June 2021 - 3
Marine Fabricator May/June 2021 - 4
Marine Fabricator May/June 2021 - 5
Marine Fabricator May/June 2021 - 6
Marine Fabricator May/June 2021 - 7
Marine Fabricator May/June 2021 - 8
Marine Fabricator May/June 2021 - 9
Marine Fabricator May/June 2021 - 10
Marine Fabricator May/June 2021 - 11
Marine Fabricator May/June 2021 - 12
Marine Fabricator May/June 2021 - 13
Marine Fabricator May/June 2021 - 14
Marine Fabricator May/June 2021 - 15
Marine Fabricator May/June 2021 - 16
Marine Fabricator May/June 2021 - 17
Marine Fabricator May/June 2021 - 18
Marine Fabricator May/June 2021 - 19
Marine Fabricator May/June 2021 - 20
Marine Fabricator May/June 2021 - 21
Marine Fabricator May/June 2021 - 22
Marine Fabricator May/June 2021 - 23
Marine Fabricator May/June 2021 - 24
Marine Fabricator May/June 2021 - 25
Marine Fabricator May/June 2021 - 26
Marine Fabricator May/June 2021 - 27
Marine Fabricator May/June 2021 - 28
Marine Fabricator May/June 2021 - 29
Marine Fabricator May/June 2021 - 30
Marine Fabricator May/June 2021 - 31
Marine Fabricator May/June 2021 - 32
Marine Fabricator May/June 2021 - 33
Marine Fabricator May/June 2021 - 34
Marine Fabricator May/June 2021 - 35
Marine Fabricator May/June 2021 - 36
Marine Fabricator May/June 2021 - 37
Marine Fabricator May/June 2021 - 38
Marine Fabricator May/June 2021 - 39
Marine Fabricator May/June 2021 - 40
Marine Fabricator May/June 2021 - 41
Marine Fabricator May/June 2021 - 42
Marine Fabricator May/June 2021 - 43
Marine Fabricator May/June 2021 - 44
Marine Fabricator May/June 2021 - Cover3
Marine Fabricator May/June 2021 - Cover4
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-march-april-2024
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-tips-and-trends-supplement-2024
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-january-february-2024
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-november-december-2023
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-september-october-2023
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-july-august-2023
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-may-june-2023
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-march-april-2023
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-january-february-2023
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-november-december-2022
https://www.nxtbook.com/ata/marinefabricator/marine-fabricator-september-october-2022
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-july-august-2022
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-may-june-2022
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-march-april-2022
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-january-february-2022
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-november-december-2021
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-september-october-2021
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-july-august-2021
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-may-june-2021
https://www.nxtbook.com/ifai/marinefabricator/marine-fabricator-march-april-2021
https://www.nxtbook.com/ifai/marinefabricator/0121MF
https://www.nxtbook.com/ifai/marinefabricator/1120MF
https://www.nxtbook.com/ifai/marinefabricator/0920MF
https://www.nxtbook.com/ifai/marinefabricator/0720MF
https://www.nxtbook.com/ifai/marinefabricator/0520MF
https://www.nxtbook.com/ifai/marinefabricator/0320MF
https://www.nxtbook.com/ifai/marinefabricator/0120MF
https://www.nxtbook.com/ifai/marinefabricator/1119MF
https://www.nxtbook.com/ifai/marinefabricator/0919MF
https://www.nxtbook.com/ifai/marinefabricator/0719MF
https://www.nxtbook.com/ifai/marinefabricator/0519MF
https://www.nxtbook.com/ifai/marinefabricator/0319MF
https://www.nxtbook.com/ifai/marinefabricator/0119MF
https://www.nxtbook.com/ifai/marinefabricator/1118MF
https://www.nxtbook.com/ifai/marinefabricator/0918MF
https://www.nxtbook.com/ifai/marinefabricator/0718MF
https://www.nxtbook.com/ifai/marinefabricator/0518MF
https://www.nxtbook.com/ifai/marinefabricator/0318MF
https://www.nxtbook.com/ifai/marinefabricator/0118MF
https://www.nxtbookmedia.com