WIREMOLD / OPEN SPACE EVOLUTION™ 4AT SERIES POKE-THRU DEVICES Evolution 4 " Series Poke-Thru Devices Ordering Information (continued) Recessed Unwired Flush Style Poke-Thru Assembly PART NUMBERS: * Designed to be installed in concrete floors * Accessibility to ceiling space below floor is required to feed power, data and A/V services * Installs into a 4 " (102mm) to a 4 1/8 " (105mm) diameter hole * Unit comes complete with flush style cover and two (2) empty gangs that are recessed 3 3/4 " (95mm) below floor surface level * The flush style cover is an aluminum cover that is designed to sit flush with finished floor coverings such as: carpet, tile, or wood * Covers are available in six finishes - Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) - Three durable finishes: Brushed aluminum (AA), satin brass plated (SB), and satin nickel plated (SN) INCLUDED Devices & Device Plates: * No device plates included Bottom Feed: * One (1) 3/4 " trade size conduit stub * One (1) 1 1/2 " trade size conduit stub 5 1/2 " (139mm) Bottom View Top View Powder Coat Finishes 4ATBK (Black) 4ATBZ (Bronze) 4ATGY (Gray) Durable Finishes 4ATAA (Brushed Aluminum) 4ATSB (Satin Brass) 4ATSN (Satin Nickel) NOTE: UL Fire Classified for up to 2-hour rated floors. NOTE: Receptacles can be wired as a standard or isolated ground device. 3 13/16 " (97mm) 2 13/16 " (72mm) 2 3/16 " (56mm) 18 9/16 " (471mm) 5 " 32 (4.2mm) * Closure plate included to seal 1 1/2 " trade size conduit stub. ** Includes junction box attached to the 3/4 " trade size conduit. Flush Style Cover NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document. 196 WWW.LEGRAND.US/WIREMOLD POKE-THRUhttp://WWW.LEGRAND.US/WIREMOLD