Instrumentation & Measurement Magazine 26-4 - 26

measurement
andapplications continued
eu4health-programme-2021-2027-vision-healthier-europeanunion_en.
[21]
S. Majumder, T. Mondal, and M. J. Deen, " Wearable sensors for
remote health monitoring, " Sensors, vol. 17, no. 1, p. 130, 2017.
[22] C. Carissimo, G. Cerro, L. Ferrigno, G. Golluccio, and A. Marino,
" Development and assessment of a movement disorder simulator
based on inertial data, " Sensors, vol. 22, no. 17, p. 6341, 2022.
[23] L. Zhou, E. Fischer, C. Tunca et al., " How we found our IMU:
guidelines to IMU selection and a comparison of seven IMUs for
pervasive healthcare applications, " Sensors, vo.. 20, no. 15, Jul. 2020.
[24] C. Carissimo, L. Ferrigno, G. Golluccio, A. Marino, and G. Cerro,
" Parkinson's disease aided diagnosis: online symptoms detection
by a low-cost wearable inertial measurement unit, " in Proc. 2022
IEEE Int. Symp. Med. Meas. Applications (MeMeA), pp. 1-6, 2022.
[25] IARC Monographs on the Evaluation of Carcinogenic Risks to Humans,
Radiation: A Review of Human Carcinogens. vol. 100 D., World
Health Organization, Intl. Agency for Research on Cancer, pp.
241-283, 2012.
[26] M. I. Cucu and D. Dupleac, " Radon. methods of measurement
and concentration reduction in various spaces, " in Proc. 2019 Int.
Conf. Energy Environ. (CIEM), pp. 398-402, 2019.
[27] A. Bernieri, D. Capriglione, L. Ferrigno, and M. Laracca, " Design
of an efficient mobile measurement system for urban pollution
monitoring, " Acta IMEKO, vol. 1, no. 1, pp. 77-84, 2012.
[28] C. Bourelly, L. Ferrigno, G. Miele, and G. Cerro, " Environmental
hazards for human health: a radon measurement IoT-enabled
platform, " in Proc. 2022 IEEE Int. Symp. Med. Meas. Applications
(MeMeA), pp. 1-6, 2022.
[29] G. Cerro, L. Ferrigno, M. Laracca, G. Miele, F. Milano and V.
Pingerna, " UWB-based indoor localization: how to optimally
design the operating setup? " IEEE Trans. Instrum. Meas., vol. 71,
no. 9509012, pp. 1-12, 2022.
[30] L. Ferrigno, G. Miele, F. Milano, V. Pingerna, G. Cerro and M.
Laracca, " A UWB-based localization system: analysis of the
effect of anchor positions and robustness enhancement in indoor
environments, " in Proc. 2021 IEEE Int. Instrum. Meas. Technol.
Conf. (I2MTC), pp. 1-6, 2021.
[31] A. B. Haney, T. Jamasb, and M. G. Pollitt, " Smart Metering and
Electricity Demand: Technology, Economics and International
Experience, " Working Papers EPRG 0903, Energy Policy Research
Group, Cambridge Judge Business School, University of
Cambridge, UK, 2009.
[32] L. Tari, G. Berrettoni, C. Bourelly, G. Cerro, D. Capriglione and L.
Ferrigno, " eLAMI-an innovative simulated dataset of electrical
loads for advanced smart energy applications, " IEEE Access, vol.
10, pp. 91177-91191, 2022.
[33] T. S. Zabkowski, M. Bator, and A. Orłowski, " Smart metering-a
brief overview of projects, benefits and applications, " Inform. Syst.
Management, vol. 1, pp. 72-83, 2012.
Carmine Bourelly (Graduate Student Member, IEEE) (carmine.bourelly@unicas.it)
received the master degree in
26
electrical engineering from the University of Cassino and
Southern Lazio, Cassino, Italy in 2017, where he is currently
pursuing the Ph.D. degree. His main interests are focused
on battery state of charge estimation, and his research interests
include detection of pollutants in wastewater, systems
for measuring radon concentration in air and evaluation of
meter accuracy in NILM applications. He worked as an Engineer
in research and development area at Italian Company
Sensichips s.r.l.
Domenico Capriglione (Senior Member, IEEE) (capriglione@
unicas.it) is an Associate Professor of electrical and electronic
measurements with the University of Cassino and Southern
Lazio, Italy. His current research interests include measurements
on RF and telecommunication systems, DSP-based
measurement systems, network measurements, and measurement
of electromagnetic compatibility. Since 2016, he has
served as the Chair for the IEEE I&M Technical Committee TC37:
Measurements and Networking.
Chiara Carissimo (Graduate Student Member IEEE) (chiara.carissimo@unicas.it)
is a pursuing the Ph.D. degree in methods,
models and technologies for engineering at the University of
Cassino and Southern Lazio, Italy, where her research activity
is focused on the detection of movement disorders using measurements
from wearable devices and the implementation of
machine learning algorithm to analyze data and to classify movement
disorders in patients with neurodegenerative diseases. She
earned her master degree in electrical engineering in 2019 from
the University of Cassino and Southern Lazio, Cassino, Italy. She
received a research grant from the University of Salerno, Italy
and worked there from May 2020 to December 2020.
Filippo Milano (Member, IEEE) (filippo.milano@unicas.it) is a Research
Fellow with the Department of Electrical and Information
Engineering, University of Cassino and Southern Lazio, Cassino,
Italy. His research interests involve the design, implementation
and characterization of positioning systems for biomedical and industrial
applications, the development of models and techniques
for the predictive batteries diagnosis and thickness estimation of
metal laminates using eddy current techniques.
Luca Tari (Graduate Student Member, IEEE) (luca.tari@unicas.
it) is pursuing the Ph.D. degree within the Department of Electrical
Engineering, University of Cassino and Southern Lazio,
Italy, where he received the M.S. degree in electrical engineering
in October 2021. His current research interests concern
electrical and electronic measurements in the field of Smart
Energy. In particular, he is working in the design of innovative
Smart Meters and the development of methods and techniques
for monitoring, analysis, energy efficiency, fault detection and
predictive diagnostics.
IEEE Instrumentation & Measurement Magazine
June 2023
https://health.ec.europa.eu/funding/eu4health-programme-2021-2027-vision-healthier-european-union_en https://health.ec.europa.eu/funding/eu4health-programme-2021-2027-vision-healthier-european-union_en
Instrumentation & Measurement Magazine 26-4

Table of Contents for the Digital Edition of Instrumentation & Measurement Magazine 26-4
