WIREMOLD EVOLUTION™ 6AT SERIES POKE-THRU DEVICES Evolution 6AT Series Cover Assemblies Ordering Information (continued) Furniture Feed Cover Assembly 6TS Tile Shim PART NUMBERS: 7 3/4" [197mm] 6CFFTCGY (Gray) 6CFFTCBK (Black) 6CFFTCNK (Nickel) 6CFFTCBS (Brass) 6CFFTCBZ (Bronze) Used for floor coverings greater than 5/16" [7.9mm]. The 6TS will allow the top surface of the cover to be flush with the finished floor. Includes: two (2) 1/8" [3.2mm] thick shims and two (2) 1/16" [1.6mm] thick shims. Up to a total of 3/8" [9.5mm] of adjustment. Surface style, die-cast aluminum cover assembly, with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2"-1 1/4" trade size screw plug opening. Cover assembly available in finishes shown. 6CFFTC Series Cover Assemblies designed for use with 6STC Poke-Thru Stem Assembly. Includes one (1) 3/4" and one (1) 2" trade size conduit fittings and one (1) divider to separate services. Evolution 6AT Series Center Mount Device Plates Ordering Information 6AAP Device Plate 6MOS Mosaic Device Plate Device plate that will accept up to two (2) Extron® Electronics AAP style plates. For use in the center compartment only. Devices supplied by others. 6ACT8A Device Plate Device plate will accept two (2) standard [45mm x 45mm] or one (1) standard [45mm x 90mm] Mosaic style device(s). Devices supplied by others. 6MOSBS Mosaic British Standard Device Plate Device plate that will accept up to eight (8) ports of communication devices. For use in the center compartment only. Devices supplied by others. 6S1 Device Plate Device plate used to blank off center compartment, when no devices are used. 6DEC Device Plate Device plate that will accept Decorator style devices such as 20A receptacles, GFCIs, 106 adapters or A/V devices. For use in the center compartment only. Devices supplied by others. 6DP Device Plate Device plate that will accept standard 20A duplex receptacle or duplex Turnlok receptacle. For use in the center compartment only. Devices supplied by others. Receptacle opening 1 3/8" [35mm]. For 6" poke-thru units only. 6S2 Device Plate Receptacle opening 1 9/16" [40mm]. For 6" poke-thru units only. 6SER Device Plate Device plate that will accept up to four (4) Ortronics® Series II dual modular inserts. For use in the center compartment only. Devices supplied by others. POKE-THRU DEVICES 6B Device Plate Device plate will accept two (2) Mosaic British standard devices [45mm x 45mm]. Devices supplied by others. 341 WWW.LEGRAND.US/WIREMOLDhttp://WWW.LEGRAND.US/WIREMOLD