WIREMOLD FLUSHDUCT INFLOOR DUCT SYSTEMS Flushduct Accessories Ordering Information (continued) Horizontal 90° Elbow 21 7/8" [555mm] PART NUMBERS: 338UF (For Single Duct) 338UF-2 (For Double Duct) 338UF-3 (For Triple Duct) 21 7/8" [555mm] 8 1/4" [222mm] Radius Threaded Outlet Flange PART NUMBERS: 455F-3/4 (3/4") 455F-1 (1") For locking nipple or standpipe. Requires 1 5/8" [41mm] hole. For turning corner with duct. Horizontal 45° Elbow Die-Cast Plug PART NUMBERS: PART NUMBERS: 342F (For Single Duct) 342F-2 (For Double Duct) 342F-3 (For Triple Duct) 455FP-3/4 (3/4") 455FP-1 (1") Threads into 455F Threaded Outlet Flange. For turning corner with duct. Vertical Offset Brass Ferrule PART NUMBERS: PART NUMBERS: 362F (For Single Duct) 362F-2 (For Double Duct) 362F-3 (For Triple Duct) 450F-1 (1" [25mm] Internal Thread) 450F-11/4 (1 1/4" [32mm] Internal Thread) Used to create access into duct at a custom location. Internal threads for nipple or standpipe. To install, field cut 1 1/2" [38mm] for 1" [25mm] ferrule (450F-1) or 1 7/8" [48mm] hole for 1 1/4" [32mm] ferrule (450F- 11/4). To accommodate 1 3/8" [35mm] change in system depth. 372F Vertical Offset To accommodate 1 3/8" [35mm] change in system depth. Brass Plug PART NUMBERS: 450FP-1 (1") 450FP-11/4 (1 1/4") 400F Screw Plug Threads into brass ferrule to close deactivated opening. 1 1/4" [32mm] screw plug for threaded openings in Flushduct. Supports obsolete "F Series" Flushduct system. Crimping Tool PART NUMBERS: 470F-1 (1") 470F-11/4 (1 1/4") 7107F Screw Plug Locking Nipple PART NUMBERS: 1124F-3/4 (For 3/4" [19.1mm] IPS Opening) 1124F-1 (For 1" [25mm] IPS Opening) Marker Screw Plug PART NUMBERS: 7140F (Brass) 7141F (Zinc) 1 5/8" [41mm] screw plug for threaded openings in Flushduct. Used to designate service in each duct. Both are 5/8" [15.9mm] long. INFLOOR DUCTS Used to install 450F Brass Ferrule. 1 5/8" [32mm] screw plug for threaded openings in Flushduct. Supports current "FST Series" Flushduct system. 597 WWW.LEGRAND.US/WIREMOLDhttp://WWW.LEGRAND.US/WIREMOLD