WIREMOLD RESOURCE RFB® SERIES FLOOR BOXES RFB6 Series Evolution Series Cover Assemblies for RFB6E and RFB6E-OG Floor Boxes Ordering Information Surface Style Cover Assembly 8TS Tile Shim PART NUMBERS: 9 1/4" [235mm] 8CTCBK* (Painted Black) 8CTCGY* (Painted Gray) 8CTCNK* (Nickel) 8CTCBS* (Brass) 8CTCBZ* (Bronze) Die-cast aluminum cover assembly. Cover assembly is available in five finishes. 8CTC Series Cover Assemblies designed for use with 8STC and 8STCP PokeThru Stem Assemblies. Surface Style Cover Assembly PART NUMBERS: 9 1/4" [235mm] 8CTBK* (Painted Black) 8CTGY* (Painted Gray) 8CTNK* (Nickel) 8CTBS* (Brass) 8CTBZ* (Bronze) Used for floor coverings greater than 5/16" [7.9mm]. The 8TS will allow the top surface of the cover to be flush with the finished floor. Includes: two (2) 1/8" [3.2mm] thick shims and two (2) 1/16" [1.6mm] thick shims. Up to a total of 3/8" [9.5mm] of adjustment. RFB6E-CTR Bare Concrete and Terrazzo Ring Nonmetallic ring for use with bare concrete and terrazzo floor applications. NOTE: For RFB4E, RFB6 and RFB6E Series Floor Boxes. Designed to work with 8CTC and 8CT Series Covers only. Die-cast aluminum cover assembly. Cover assembly is available in five finishes. 8CTC Series Cover Assemblies designed for use with 8STC and 8STCP Poke-Thru Stem Assemblies. Includes one (1) 8TS Tile Shim. * Add suffix "TR" to the end of the part number to indicate tamperresistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Load Capacities for Evolution™ Series Cover Assemblies Catalog Numbers Maximum Load in Pounds 6CT 1000 6CTC 1000 6CFFTC 1000 8CT 1000 8CTC 1000 FLOOR BOXES NOTE: Load applied through a 1" mandrel in the center of cover assembly. NOTE: Loads above are static loads only and do not pertain to rolling loads. 455 WWW.LEGRAND.US/WIREMOLDhttp://WWW.LEGRAND.US/WIREMOLD