WIREMOLD RC7 SERIES™ POKE-THRU DEVICES RC7 Series Poke-Thru Devices Ordering Information RC7STC Insert Assembly with Disposable Plate Slide Holder Assembly PART NUMBERS: Used with RC7CTC Series Covers to complete installation. 5" [127mm] 16 1/2" [419mm] Nonmetallic slide holder assembly. Assembled with scrub water gasket. For use on tile or carpet floors. Abandonment Plate PART NUMBERS: RC7CTCAA (All Aluminum) RC7CTCAB (All Brass) RC7CTCGY (Gray) RC7CTCBK (Black) RC7CTCAL (Aluminum) RC7CTCBS (Brass) Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Aluminum and brass flanges shipped with black slide cover. Includes Wiremold Open System unloaded inserts. PART NUMBERS: 5" [127mm] NOTE: To abandon the RC7 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. RC37REC, RC37REC-25 Replacement Receptacle Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details. The RC37REC-25 is available with 25 foot leads and can be wired as standard duplex or isolated ground. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. Assembled Poke-Thru Device ABPLUG3 Abandonment Plug Assembly PART NUMBERS: 7" [178mm] 16 1/2" [419mm] RC7ATCAA (All Aluminum) RC7ATCAB (All Brass) RC7ATCGY (Gray) RC7ATCBK (Black) RC7ATCAL (Aluminum) RC7ATCBS (Brass) Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Aluminum and brass flanges shipped with black slide cover. Includes Wiremold Open System unloaded inserts. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. NOTE: RC7 Series Poke-Thru Devices require a 3 1/16" [78mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. RC7APTCGY (Gray) RC9APTCBK (Black) 7" [178mm] 3 3/16" [97mm] Complete plug assembly for abandoning an open 3" [76mm] diameter hole. Assembly includes intumescent fire-stop material to maintain the fire-classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black diecast aluminum cover. COM75 Communication Adapter For two 3/4" trade size conduit connections (COM75). No additional capacity with COM75. NOTE: RC7 Series Poke-Thru Devices require a 3 1/16" [78mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. POKE-THRU DEVICES Assembled Poke-Thru Device 7" [178mm] RC7SHTCGY (Gray) RC7SHTCBK (Black) RC7SHTCAA (Aluminum) RC7SHTCBS (Brass) 353 WWW.LEGRAND.US/WIREMOLDhttp://WWW.LEGRAND.US/WIREMOLD