WIREMOLD RC3 SERIES™ POKE-THRU DEVICES RC3 Series Poke-Thru Devices Ordering Information Slide Holder PART NUMBERS: 7 1/2" [191mm] PART NUMBERS: RC3CTCAA (All Aluminum) RC3CTCAB (All Brass) RC3CTCGY (Gray) RC3CTCBK (Black) RC3CTCAL (Aluminum) RC3CTCBS (Brass) Finish flange and slide holder. Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Includes Wiremold Open System unloaded adapters to accept four (4) discrete keystone connectors from most manufacturers. Unit also includes two (2) Ortronics TracJack adapters and two (2) Ortronics Series II adapters. Modular Jacks sold separately. 5" [127mm] Nonmetallic slide holder assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC37REC, RC37REC-25 Replacement Receptacles Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details. The RC37REC-25 is available with 25 foot [7.62m] leads and can be wired as standard duplex or isolated ground. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Assembled Poke-Thru Device PART NUMBERS: RC3ATCAA (All Aluminum) RC3ATCAB (All Brass) RC3ATCGY (Gray) RC3ATCBK (Black) RC3ATCAL (Aluminum) RC3ATCBS (Brass) 7 1/2" [191mm] 16" [406mm] 3/4" Trade Size Conduit Stem Assembled unit. Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Includes Wiremold Open System unloaded adapters to accept four (4) discrete keystone connectors from most manufacturers. Unit also includes two (2) Ortronics TracJack adapters and two (2) Ortronics Series II adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. NOTE: RC3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. RC3SHTCGY (Gray) RC3SHTCBK (Black) RC3SHTCBS (Brass) RC3SHTCAA (Aluminum) NOTE: The 20A duplex receptacle supplied with the new scrub water version RC3 Poke-Thru Device is proprietary and can only be replaced with the RC37REC. NOTE: RC3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. COM75 Communication Adapter For two 3/4" trade size conduit connections. No additional capacity with COM75. ABPLUG4 Abandonment Plug Assembly Complete plug assembly for abandoning an open 4" [102mm] diameter hole. Assembly includes 3 7/8" [98mm] intumescent fire-stop material to maintain the fire classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black die-cast aluminum cover. 7 1/2" [191mm] POKE-THRU DEVICES Finish Flange & Slide Holder 363 WWW.LEGRAND.US/WIREMOLDhttp://WWW.LEGRAND.US/WIREMOLD