SUBMINIATURE How To Order Use the Bold characters from the chart below to construct a product code. Please reference Notes. PS32 -20 -4MNB -A -SP -XX -XXXX 1 2 1 Series PS32 or PS52 2 Pressure Range Code Insert Pressure Range Code from Tables 1, below. 3 Pressure Fitting1 Brass -2MNB = 1/8˝ NPTM -4MNB = 1/4˝ NPTM -2MGB = 1/8˝ BSPM (G type) -4MGB = 1/4˝ BSPM (G type) -4MSB = 7/16˝-20 SAE Male 316 Stainless Steel -2MNS = 1/8˝ NPTM -4MNS = 1/4˝ NPTM -2MGS = 1/8˝ BSPM (G type) -4MGS = 1/4˝ BSPM (G type) -4MSS = 7/16˝-20 SAE Male 4 Circuit -A = SPST/N.O. -B = SPST/N.C. 5 Electrical Termination -SP = Spade Terminals (standard) -TS = Terminal Screws -FLXX = Flying Leads2 -FLSXX = Flying Leads w/PVC Shrink Tubing2 -CABXX = 18 AWG PVC Cable3 3 4 5 6 6 Options -V = Viton® Diaphragm -E = EPDM Diaphragm -H = ECOH Diaphragm -G = Gold Contacts (for loads less than 12 mA @ 12 VDC) -IP = Ingress Protection4 -IPA = Removable Silicone Seal for Set Point Adjustment5 -OF = Oil Free Cleaned -RB = Rubber Boot (shipped loose) -WF = Weather Pack Connector, Female -WM = Weather Pack Connector, Male -DE = Deutsch Connector, Male, DT04 Series 7 Fixed Set Point (optional) A. Specify set point -FS (in PSI or BAR, see example)6 B. Set Point Actuation R on Rising Pressure F on Falling Pressure Example: -FS0.6BARF for 0.6 BAR Falling or -FS10PSIR for 10 PSI Rising 7 Notes: 1. Other fittings available. Consult factory. 2. 18˝ is standard. Specify lead length in inches (max. 48˝). e.g. -FL18 or -FLS30. 3. 36˝ is minimum. Specify cable length in inches. e.g. -CAB36 or -CAB120. 4. Ingress Protection is available only with -FL, -FLS or -CAB Electrical Termination choices. 5. IPA protection is available only with -FL or -FLS. 6. Set Point must be within Pressure Range selected in Step 2. Table 1 - Pressure Range Codes Pressure Range Code Pressure Range Accuracy* Average Deadband** 20 10-25 psi (0.69-1.7 bar) ±1 psi (0.07 bar) +3% of setting 2 psi (0.14 bar) +4% of setting 30 20-60 psi (1.4-4.1 bar) ±1.5 psi (0.10 bar) +3% of setting 3 psi (0.21 bar) +4% of setting 40 50-150 psi (3.4-10.3 bar) ±2.5 psi (0.17 bar) +3% of setting 4 psig (0.28 bar) +4% of setting Pressure Range Code Pressure Range Accuracy* Average Deadband** 15 50-150 psi (3.4-10.3 bar) ±3.0 psi (0.21 bar) +4% of setting 5 psi (0.14 bar) +5% of setting 20 150-300 psi (10.3-20.7 bar) ±4 psi (0.28 bar) +4% of setting 8 psi (0.21 bar) +5% of setting PS52 PRESSURE SWITCHES PS32 * Accuracy and set point of units may change due to the effects of temperature. ** In certain applications deadband can be tailored and controlled to customer specifications. Consult factory for details. PS32/52 Series / p2of2 / 07-MAY-14 Visit www.GemsSensors.com for most current information. I-14http://ecatalog.gemssensors.com/ecatalog/pressure-switches/en/gemslink/1=PS32 http://ecatalog.gemssensors.com/ecatalog/pressure-switches/en/gemslink/1=PS52 http://ecatalog.gemssensors.com/ecatalog/pressure-switches/en/gemslink/1=PS52 http://ecatalog.gemssensors.com/ecatalog/pressure-switches/en/gemslink/1=PS32 http://www.GemsSensors.com