Fleet Maintenance - 22

Can carry out vertical or horizontal frame repairs

Featured
Product

The Josam Frame Press is designed to make heavy
duty frame straightening easy and efficient. The
Frame Press system is founded
on the principle
of I-beams cast
in the shop floor.
Combined with the
optional Josam service pit, it makes
for an ideal working
area for straightening heavy and
light trucks, trailers, and buses. Presses and other tools are anchored
to the floor rails, enabling both horizontal and vertical
repairs to be carried out. The system works hydraulically, is manufactured in three versions, and includes
straightening trolleys, C-clamps, vertical presses and
pumps, and chain attachments/anchoring.

Total air system protection
The Expello Automatic Drain Valve eliminates
water and contamination in compressed air
systems. The valve replaces the manual drain on a
vehicle's wet tank. The Expello valve purges water,
dirt, and oil from the air system in a quick, onesecond burst, every five minutes while the vehicle
is running. That means clean, dry air for the entire
air system and an end to frozen air brakes.

For more information visit VehicleServicePros.com/21092894

 For more information visit VehicleServicePros.com/21076811

800-766-4243 | expelloairproducts.com

Developed specifically to package with e-axles
The Reyco Granning Suspensions 240AR-EV is
a drive axle air suspension designed specifically to
package with e-axles. Low profile frame brackets
leave room for body mounts or
fifth wheel angles. The curved
spring beam eliminates the traditional lower air
spring mount to
increase ground
clearance,
reduce weight, and
accommodate a range
of frame widths. Packaging
efficiencies were a focus in order to
accommodate for a larger e-axle space-claim. The
240AR-EV has a GAWR range of 17,000 lbs to 23,000
lbs and is suitable for single or tandem drive axle
arrangements. Ride heights range from 8.5" to 10".

 For more information visit VehicleServicePros.com/21077994

More than 60 lbs lighter than
existing tandem axles

Helps improve vehicle efficiency
The Firestone Industrial Products Intelligent Air
Spring Sensor enables electric height control and is
designed to have an impact on electric vehicles of the
future. Electronic height control reduces air compressor run-times by up to 80 percent, according to the
company, improving fuel and overall vehicle efficiency. The Intelligent Air Spring Sensors are integrated
into the air spring to eliminate environmental wear
and are easy to install.

The Dana Spicer D172 Series Heavy Duty Tandem
Axle is designed for construction, heavy haul, and
severe service applications. The D172 is more than
60 lbs lighter than the company's existing D170
series tandem axles and offers a broad range of gear
ratios, from 3.07 to 6.14, to serve a variety of needs.
Wide-face, High-Power Density AdvanTEK gearing is
designed to maximize strength while reducing weight.
A reliable, passive lube management system requires
less lube while using a patented meter to optimize the
amount of lube flow to the high-efficiency bearings,
according to the company.

 For more information visit VehicleServicePros.com/21021944

 For more information visit VehicleServicePros.com/21026760

Accurately position the rear axles

Designed specifically for heavy duty fire and rescue markets

The Bee Line 22000 Rear Axle Aligner allows users to accurately position the
rear axles perpendicular to the vehicle's centerline so the wheels travel in a straight
line. The user-friendly construction allows novices to set up the
Rear Axle Aligner, and one person can take all necessary measurements in a few minutes, the company
says. The unit calibrates reliably and quickly to
assure consistent accuracy with no added expense
or service fee. The wheel cradles weigh less than
20 lbs, and the rear beam weighs 10 lbs.
A long life ni-cad battery powers the
laser for up to 20 hours before
recharging. The unit does not
require access to AC power.

The Hendrickson Roadmaax Heavy Duty Air Suspension is designed
specifically for heavy duty fire and rescue markets
with ride quality and equipment protection features. The Roadmaax system has
been through test and validation
procedures based on real-world
road conditions and has received
positive feedback on its performance and capabilities. The integration
of Hendrickson's main support member spring
technology, with its wide stance air springs,
provides a balance of predictable handling and
ride quality even over a variety of terrain.

 For more information visit

VehicleServicePros.com/21068915

22 Fleet Maintenance | September 2019

 For more information visit VehicleServicePros.com/21075643

http://www.VehicleServicePros.com/21092894 http://www.VehicleServicePros.com/21076811 http://www.expelloairproducts.com http://www.VehicleServicePros.com/21021944 http://www.VehicleServicePros.com/21077994 http://www.VehicleServicePros.com/21026760 http://www.VehicleServicePros.com/21068915 http://www.VehicleServicePros.com/21075643

Fleet Maintenance

Table of Contents for the Digital Edition of Fleet Maintenance